SecurityCommand XRSuper6 Operation & User’s Manual

Information furnished by DMP is believed to be accurate and reliable. This information is subject to change without notice. The XRSuper6 panel is UL listed for Standard Line Security Household Service and Commercial Burglary Service. Silencing an Alarm When the alarm bell or siren is sounding, enter your user code or present your card to a keypad or reader during the Status List display. All/Perimeter or Home/Sleep ...

i Security Command™ User’s Guide for XRSuper6 Command Processor™ Panels Table of Contents Section Page Section Page Silencing an Alarm.......................... Inside Front Cover Introduction...............................................................1 About Your Security System..............................................1 Emergency Evacuation Plans.............................................2 DMP Keypads............... ...

Section Page System Setup...........................................................27 System Setup Record..................................................... 27 Outputs......................................................................... 27 Key Fob Button Programming ......................................... 28 User Codes.................................................................... 28 Appendix A...................... ...

1 Introduction About Your Security System Your system is designed with your safety and comfort in mind. It uses the latest in computer technology to create the most advanced, user friendly, security, fire, and access control system available. The system combines ease of use with a simple to understand keypad display to offer the full range of features requested by today’s security system owners. Your security system ...

Introduction Emergency Evacuation Plans Overview The National Fire Protection Association recommends that you establish an emergency evacuation plan to safeguard lives in the event of a fire or other emergency. Draw a floor plan of your home or business On a clean sheet of paper, draw the walls, windows, doors, and stairs. Also draw any obstacles that a person may encounter while exiting the building such as large furniture or ap ...

3 A B C D E F G H I J K L VWX M N O P Q R S T U Y Z COMMAND 9 0 1 2 3 4 5 6 7 8 R ABC PRINTING FR I 2 : 51 AM A R M E D 32-Character Display Armed LED Power LED Select Keys Data Entry Digit keys COMMAND Key Back Arrow Key ! Security Command™ Keypad 32-Character Display Armed LED Power LED Data Entry Digit keys COMMAND Key Back Arrow Key Select Keys 1 2 3 4 9 0 CMD 5 6 7 8 ABC PRINTING FRI 2 : 51 AM Backlit Logo a ...

Introduction Clear Touch™ Keypads AC Power/Armed LED Three Panic Icons 32-Character Display with Four Touch Select Areas Data Entry Digit Keys COMMAND Key Back Arrow Key Logo Icon I FRI : 2 51 AM Clear Touch™ Keypad Clear Touch™ Select Areas — There are four Select Areas in the display. These Select Areas are one of the features that make your system so easy to operate. They allow you to make selections by touching the a ...

5 Clear Touch™ Keypads Touch the icon for 2 seconds until a beep is heard. Police Emergency Fire Touch Select Areas Clear Touch™ Keypad Panic Icons Security Command™, Thinline™, Aqualite™ Keypads 7/0 Panic Function Security Command™, Thinline™, and Aqualite™ Keypads may also be programmed at installation to allow the user to initiate an optional Panic alarm by simultaneously pressing and holding th ...

Introduction Keypad User Options The User Options allow you to make adjustments to your keypad to best fit your environment and needs. On Security Command™, Thinline™, or Aqualite™ keypads to access the User Options portion of the keypad, press and hold the Back Arrow and COMMAND keys for two seconds. The keypad display changes to SET BRIGHTNESS. Press the COMMAND key to display the next option or the Back Arrow key to exi ...

7 Burglary alert: A siren tone from LCD keypads only that continues until the alarm is silenced. This is in addition to the bell output from the alarm panel. Key press tone: A short beep as you press a key on the keypad. Prewarn tone: A continuous pulsed tone that sounds when you open an entry delay door on a system that is armed (turned on) reminding you to disarm the burglary protection. Your system may be pre-progra ...

Introduction Special Wireless Displays Your system may use wireless transmitters to send alarm and trouble information from the protection devices to the panel. Wireless systems have a few unique keypad displays. BACK DOOR -LOBAT - (Low Battery) The battery in a wireless transmitter is low. (BACK DOOR is used as an example only.) BACK DOOR -MISNG - (Missing) The panel is not receiving the wireless transmitter periodic test report ...

9 TRBL (TROUBLE) There is a problem with a protection device or system component. This display is accompanied by a description of the problem. SYSTEM TROUBLE or SERVICE REQUIRED There is an electronic failure in your system. Contact the service department as soon as possible. TEST IN PROGRESS The system is currently being tested by an installation or service technician. Understanding Security System Terms Throughou ...

Introduction Areas An area is made up of burglary zones that can be armed or disarmed together. The Perimeter area, for example, consists of all the doors and windows on the outside of the building. When you arm the Perimeter, these zones sound an alarm if tripped. Central Station Monitoring Your system can also be programmed to automatically send alarm, trouble, and arming and disarming reports to a central station. Operators ...

XRSuper6 User’s Guide 11 Arming and Disarming How Your System Operates Your system has been programmed to operate in one of two modes: All/Perimeter or Home/Sleep/Away. • All/Perimeter — Your burglary protection is divided into two areas: Interior and Perimeter. Perimeter arming is for when you are staying inside but want the comfort of knowing the exterior doors and windows are armed. Perimeter arming allows you to move freely ...

Arming and Disarming Exit Delay: The keypad then displays the exit delay time as it counts down. Your system may be pre-programmed at installation to beep the exit delay tone at eight-second intervals until the last 10 seconds when the keypad beeps at three‑second intervals. After exiting the building, if you re-enter during the countdown the exit countdown restarts, allowing additional time to then disarm or again exit the bu ...

XRSuper6 User’s Guide 13 System Ready/System Not Ready Keypad Displays When all zones in the system are in a normal condition, the keypad displays SYSTEM READY. If there are one or more zones that are not in a normal condition, the keypad displays SYSTEM NOT READY. Pressing any Select key during this display shows the zone name allowing you to investigate the problem. Instant Arming Instant: During the exit delay time, you can canc ...

Arming and Disarming 2. If a valid alarm has not occurred, Select CANCEL to disarm the system and cancel the alarm. The keypad displays ALARM CANCELLED then ALL SYSTEM OFF to confirm the system is disarmed. OR If the alarm is valid, select VERIFY to send a verify message to the Central Station. Home/Away System Arming Area Assignment: Your security system is divided into two or three separate areas. Motion detectors, inside doo ...

XRSuper6 User’s Guide 15 Home/Sleep/Away Shortcut Key Arming Arm Home — Press 3 for 2 seconds to arm the perimeter. Arm Sleep — Press 7 for 2 seconds to arm the perimeter and interior areas and leave the bedroom area off. Arm Away — Press 1 for 2 seconds. Arming a Home/Away System 1. Enter your user code. The keypad displays HOME AWAY or HOME SLEEP AWAY (you may have three areas). 2. Select HOME to arm the Perimeter only ...

Arming and Disarming 2. If a valid alarm has not occurred, Select CANCEL to disarm the system and cancel the alarm. The keypad displays ALARM CANCELLED then ALL SYSTEM OFF to confirm the system is disarmed. OR If the alarm is valid, select VERIFY to send a verify message to the Central Station. Keypad Shortcut Keys Your LCD keypad provides one‑button shortcut keys. Holding down the selected keypad button for two seconds until ...