SkyLink KN-MT Installation Instructions

Text of the manual

Section 2 - Programming the Keypad with M-Series Main Console

1. Press the learn button on the back of the M-Series Main Console for 3 seconds until the Zone 1 light is fashing. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This

When the operation range is reduced, or when the backlight LED does not

fash during operation, it is time to replace the battery. Follow the instructions below to replace the battery: 1. Undo the screw (1) on the back plate of the keypad. 2. Pry out the back plate from the keypad. 3. Take out the old battery (2) from the keypad. 4. Place the new battery (2)

Other Keypad Manuals