Skymaster DCX 10 CI Operating Instructions Manual

1 3 4 3 2 1 7 4 3 5 6 8 2 3 2 1 4 5 6 9 9 10 13 11 8 7 16 15 14 11 12 TV AC3/SURROUND VCR 230 V A B C D DISH 5 ...

product satisfaction. The SKYMASTER® DCX 10 CI is designed to receive uncoded digital TV, but can also receive coded channels (e.g. Arena, ORF) if a respective Cryptoworks smart card is used. In order to decode further channels, the device has been equipped with a CI interface (CAM module and Sm ...

3. Receiver Operating Elements (see packaging) 4. Remote control 1 LED display (four digits) displays the time in standby mode and the selected channel number in operating mode; 2 Infrared receiver recognises the infrared command signals from the remote control; 3 Channel selection upwards / down- wards (�/�) for scrolling in menu mode and for selecting a channel in program mode; 4 On/Off button switches from standby to ope ...

After initial start-up or after resetting the factory default setting, please select the default setting for Germany or Austria. This sets the channel lists and decoding system for the selected country. 5.1 Prior to Configuration Information: A menu is a text field which appears on the TV screen. Selectable menu options are usually colour highlighted. Options which are not colour highlighted cannot be altered or set. The ...

5.2.2 Antenna Setup Select the option “Antenna Setup” in the “Setup Menu” and press the OK button. A window with the following menu items appears on the screen. A value can be set for these items: “SAT”, “LNB Frequency”, “22kHz Tone”, “DiSEqC”, “LNB Power” and “Positioner”. Mark and select the satellites via the OK button. If you remove the tick, the question “Delete channel?” appears; ...

� Motor Control It is possible to select various factory-set satellites under the menu item “Satellite”. The preset transponders are displayed in the following order under “Transponder”: Transponder Number, Frequency, Polarity (V or H) and Symbolrate. It is possible to change the position of your motor via the “Move” function. Use the left and right-hand arrow buttons for this task. Simply observe the “Si ...

5.2.3 Channel Search Select the option “Channel Search” in the “Setup Menu” and press the OK button. A window with the following menu items appears on the screen. A value can be set for these items: “Satellite“, “Tune Method”, “Transponder”, “Frequency”, “Symbolrate”, “Polarity”, “FEC”, “Function” and “AGC Signal” (signal strength). Satellite: Select from the saved list. Tune M ...

5.2.4 Setup LOCK/PIN Select the option “Setup Lock/PIN” in the “Setup Menu” and press the OK button. A window with the following menu items appears on the screen. Subsequently carry out the setting for “Menu Lock”. It is possible to change your PIN under the menu item “Change Password”. If you wish to change your PIN, enter a new password under “New Password” and confirm your entry under “Confirm Pa ...

5.3 Setup via the Main Menu It is possible to access the following menu options via the main menu: “Program Guide“, “Sort Programs”, “Language”, “Edit Channels”, “Scramble System”, “About Version”. • Press the MENU button. • Scroll up and down the list via the CH �/� buttons. • Select the desired value via the Vol �/� buttons. • Select the value and press the OK button to confirm y ...

5.3.2 Sort Programs Select the option “Sort Programs” in the “Main Menu” and press the OK button. The following window appears on the screen: It is now possible to access the channels which have been sorted alphabetically . • Select a letter via the Vol �/� buttons. • Press the OK button to confirm your selection. • Move in the list via the CH �/� buttons. • Scroll through the pages via the Vol � ...

Select favourites Use the CH �/�, Vol �/� buttons and the OK button to select the respective channel in the favourite column. Then use the CH �/� buttons and the OK button to allocate the channel in the category overview which has just appeared. The following categories are available: [1] Movies, [2] Music, [3] Cartoons, [4] News und [5] Sports. Select point [0] “Unselect” to delete a channel from a favo ...

5.3.5 Scramble System Use your receiver to enjoy not only free-to-air programs but also ones coded with Cryptoworks (if you possess a smart card from a program provider). Additionaly the receiver contains a CI slot for using crypt system modules different. Select the option “Scramble Systems – Conditional Access” in the “Main Menu” and press the OK button. The following window appears on the screen (only works ...

5.3.6 About Version / Software Update Move the cursor in the “Main Menu” over the option “About Version” and press the OK button. A window appears on the screen with details about the model name, build date and the application version. To update the software via satellite (only for Astra reception) access the “System Software Update Service” menu and confirm via the OK button. Enter your PIN (factory setting ...

- Favourites List Press the FAV button while watching TV or listening to the radio to access a list with your favourite channels or stations (TV or radio). If favourite channels/stations have not been entered into a respective list (see above), there will be no reaction on the screen. Press the CH �/� button to exit and subsequently confirm the channel you wish to watch via the OK button. If you now use the CH �/� ...

Problem Possible Reason Remedy Front LED display does not light up. Mains plug not connected. Connect the plug to the mains socket correctly. No picture or sound. Video/Audio output incor-rectly connected to the TV input. Connect two connections with Scart, RCA correctly. No signal or weak signal. Check ...

8. Technical data 9. Service Dear Customer! Please bear in mind that unjustified complaints will cost you money! Please consult our telephone HOTLINE if you need assistance. Here experts will provide you with speedy advice and tips on localising the cause of a fault. If it transpires that the problem is actually a defective device, please send it in for repair with a precise description of the fault. Our HOTLINE: (D) 0900 1 5 ...