Sony MDR-IF130K Operating Instructions Manual

MI Mode d'emploi page 12 � Ell Manual de instrucciones pagina 22 _II MDR-IF130K © 1998 by Sony Corporation ...

do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. WARNING You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Owner's Record The model nu ...

MDR-IF130K Cordless Stereo Headphone System. Before operating the unit, please read this manual thoroughly and retain it for future reference. Some features are: • Cordless system that allows you to listen to a program free from the restriction of a cord. • Broad horizontal listening area that gives you superb s ...

• Connecting cord (phono plugs stereo mini plug) MDR-IF230 MO' Getting started Unpacking Check that you have the following items: • Transmitter TMR-IFI30 • AC power adaptor Setting up the transmitter 11 Connect the transmitter to audio/ video equipment. ® When connecting to your audio/ video system's LINE OUT or REC OUT jacks, connect ...

Right channel (red) Connecting cord (supplied) Unimatch plug adaptor (not supplied) to a headphones jack (stereo phone jack) to a headphones jack (stereo mini jack) Discman, WALKMAN*, TV, VCR, etc. _ T LINE IN � ONES � DtFa Left channel (white) 0 When connecting to your Discman's headphones jack, connect the cord to the transmitter's P ...

Setting up the headphones I Open the battery compartment lid on top of the left housing. 2 Insert one R6 (size AA) battery by matching the + on the battery to the + terminal on the lid. 3 Close the battery compartment lid. Removing the battery Open the battery compartment lid, while keeping the housing level and remove the bat ...

Listening to a program 11 Turn on the audio/video equipment connected to the transmitter. When the audio signals is input, the transmitter turns on automatically and the infrared emitters glow. If the transmitter is connected to the headphone jack, set the volume control of the audio source equipment as high as possible but not so high t ...

(1181/8 in.) Approx. 3 m (1181/8 in.) Infrared ray Place the new ear pad around the driver unit as illustrated. The effective areas of the transmitter The illustration below shows the approximate area covered by the infrared rays emitted from the transmitter. Notes • If you use the headphones at too great a distance from the transmi ...

Precautions • Before operating the system, check that the operating voltage of your system is identical with the voltage of your local power supply. • The CE mark on the unit is valid only for products marketed in the European Union. • When the headphones is not to be used for a long period of time, remove the battery to av ...

Check the connection of the audio/video equipment or the AC power adaptor. .* Check that the audio/video equipment is turned on. a+ Turn up the volume on the connected audio/video equipment, if the transmitter is connected to the headphones jack. (Around level 5 or 6 on the volume control should be appropriate.) ▪ The ...