Planet VC-2400MR48 Quick Installation Manual

VC-820M 24-Port VDSL2 + 2-Gigabit TP/SFP Managed Switch VC-2400MR / VC-2400MR48 Quick Installation Guide ...

1. Package Content.......................................................................................... 3 2. Requirements.............................................................................................. 4 3. Terminal Setup............................................................................................ 5 4. Logo ...

Thank you for purchasing PLANET 8 / 24-Port VDSL2 + 2-Port Gigabit TP/SFP Combo Managed Switch, VC-820M and VC-2400MR / VC-2400MR48. Terms of “VDSL2 Managed Switch” means the switches mentioned titled in the cover page of this Quick Installation Guide. Upon open the box of the VDSL2 Managed Switch and carefully unpack it. The box sho ...

following equipments are necessary for further management. Workstation installed with Ethernet NIC (Network Interface Card) Workstations of subscribers running Windows XP/2003, Vista, Windows 7, MAC OS X, Linux, Fedora, Ubuntu or other platform compatible with TCP/IP prot ...

To configure the system, connect a serial cable to a COM port on a PC or notebook computer and to serial (console) port of the VDSL2 Managed Switch. The console port of the VDSL2 Managed Switch is DCE already, so that you can connect the console port directly through PC without the need of Null Modem. PC / Workstation with Terminal emulat ...

2. When the following screen appears, make sure that the COM port should be configured as: Baud : 57600 Parity : None Data bits : 8 Stop bits : 1 Flow Control : None Figure 3-2 Hyper Terminal Setting n n n n n ...

Once the terminal has connected to the device, power on the VDSL2 Managed Switch, the terminal will display that it is running testing procedures. Then, the following message asks the login user name and password. The factory default password as following and the login screen in Figure 4-1 appears. User Name: admin Password: admin N ...

The VDSL2 Managed Switch is shipped with default IP address as following. IP Address: 192.168.0.100 Subnet Mask: 255.255.255.0 To check the current IP address or modify a new IP address for the Switch, please use the procedures as follow: n Show the current IP address 1. On “Switch#” prompt, enter “configure” 2. On “Switch ...

IP Address: 192.168.1.100 Subnet Mask: 255.255.255.0 Gateway: 192.168.1.254 Figure 5-2 Set IP address screen 5. Repeat Step 1 to check if the IP address is changed. n Store current switch configuration 6. On “Switch(config)#” prompt, enter the following command and press . Swi ...

The VDSL2 Managed Switch provides a built-in Web browser interface. You can manage it remotely by having a remote host with Web browser, such as Microsoft Internet Explorer, Netscape Navigator or Mozilla Firefox. 192.168.0.x PC / Workstation with IE Browser RJ-45/UTP-Cable Managed Switch IP Address: 192.168.0.100 IP Address: Figure ...