Extech Instruments BR80 Operation & User’s Manual

Text of the manual

Video Borescope Inspection Camera

Model BR80 actoolsupply.com actoolsupply.com actoolsupply.com Extech BR80 Video Borescope Inspection Camera 17mm

Congratulations on your purchase of the Extech BR80 Video Borescope. This instrument was

designed for use as a remote inspection device. Typical applications include HVAC inspection, automotive inspection, cable routing, and boat/aircraft inspection. This meter is shipped fully tested and, with proper use, will provide y

Safety and Care

 Do not expose instrument (display) to moisture  Switch off the instrument when not in use  Remove the batteries when cleaning the instrument  Replace all of the batteries at the same time  Do not immerse the camera in water  Store in a dry place  Only the camera head and the flex tube are water r

Connect the monitor and flexible tube

Connect the camera tube to the instrument body. Ensure that the keyed ends are properly aligned. Once aligned, tighten the knurled knob to hold the connection firmly in place. Start-up 1. Press the power button to switch the camera ON; if there is sufficient battery power the power indi

LCD Screen Type

2.36” TFT-LCD Pixels 480 x 234 Horizontal View Angle 50 degrees Working length 1m (39”) Camera head diameter 17mm (0.67”) Shaft diameter 9mm (0.35”) Focus length 5.1 cm (2”) Auto Power OFF (APO) OFF /5 min. /10 min. selectable Waterproof Capacity IP67 (imager head and tube)

Other Analytical Instruments Manuals