Ikelite 6973.03 Instruction Manual

instruction manual completely before attempting to operate or dive with this product. Please refer to the back page of this manual to register your Ikelite product. Underwater Housing for Canon EOS M3 Product Number 6973.03 I n s t r u c t i o n M a n u a l ...

SPECIFICATIONS - no camera installed ....................P. 4 INCLUDED in the BOX ..................................................P. 4 Parts of the Housing - Front View ..................................P. 5 Parts of the Housing - Back View ..................................P. ...

rated to 200 ft (60 m). Thoroughly inspect and immerse the empty housing completely in water before installing a camera. If any fogging occurs or droplets of water enter the housing, do not install a camera. Clean the main housing o-ring and retest to make sure that the housing is wate ...

Buoyancy ..............................Slightly negative in freshwater Depth Rating..........................200 ft (60 m) Strobe Connection................Ikelite Digital TTL ICS-5 5-pin Electrical ................................................Bulkhead plus TTL circuitr ...

Shutter Button Lens Port Base External Tray Mounts Lid Snap Front Dial External Strobe Connector & Cap Lens Release Button Exp. Comp. Dial M-Fn Button Fiber Optic Ports Flash Pop-up Switch ...

2. Power Button 3. Movie Button 4. Playback Button 5. AE Lock Button 6. AF Frame Adjustment 7. ISO/UP Button 8. MF/LEFT Button 9. Quick Setting Menu/SET Button 10. Flash/RIGHT Button 11. Erase/DOWN Button 12. INFO Information Button 13. MENU Button 14. Control Dial Parts of the Housing ...

One side of the Spacer has an adhesive backing. Remove the Protective Film to adhere the Spacer to the Tray. Using a 9/16” open/box end or socket Wrench (not supplied), firmly tighten the External Tray and Spacer to the Mounting Bolts using the two 3/8-16 Nuts and Washers supplied in the accessory pac ...

- Set Mode Dial to “M” Manual Mode. Set Aperture to f/8 and shutter speed to 1/125th second. Other shooting modes are not recommended. - In Menu: Set Image Quality to “L” 24M and Still Image Aspect Ratio to “3:2.” Set Image Review to “8 sec” and Touch Shutter to “Disable.” Set ...

Lid Snaps have a Lock. 1. Push Lid Snap Locks forward and lift as shown. Open opposing Lid Snaps simultaneously. Keep pressure on the Lid Snaps so they do not fly open quickly. Some Lid Snaps have a lot of spring tension once they go over center, so keep a firm grip on each Lid Snap. Lid Snaps may also be opened one at a time. ...

4. Using a coin or flathead screwdriver (preferred), secure the camera Mounting Tray to the camera tripod mount, Diagram B. Tighten camera firmly to avoid movement on tray. The Mounting Tray only attaches one way with the Thumb Screw to the back of the camera. An additional 1/4-20-inch tray hole allow ...