Ikelite 9523.61 Instruction Manual
Text of the manual
Tray with Handle(s)
Instruction Manual
9523.61 Tray with Single Handle
9523.62 Tray with Dual Handles
Thank you for choosing Ikelite equipment. Please read this instruction
manual completely before attempting to operate or dive with this product.
Package Contents
12-24 Shoulder Washer (Qty. 2)
1/4” Nut (Qty. 2 with Dual Tray)
12-24 x 1/2”Screw (Qty. 2)
F
Insert handle into the tray as shown below. Attach and tighten to tray
using flat washer and 1/4” nut. The handle is removable in the event that
replacement is necessary. The handle is not intended to be removed for
travel. The completed assembly may be removed and replaced easily for
travel.
Attaching Handle to the Tray
1/4” Nut
Threaded Handle Stem
F
Match your housing
to the correct tray
insert as shown.
The insert cut-out
should match the
bottom of the
housing tripod mount base plate,
diagram A. Remove protective backing to expose adhesive and attach
insert to recess in the center of the tray, diagram B. Attach tray to
housing through Center Hole using 1/4-20 x 1/2” Screw and Split Lock
Washer, dia
Attach tray to Ikelite housing using two 12-24 x 1/2” Screws and
Shoulder Washers for housings with female-threaded mounting systems.
For male-threaded mounting systems with a housing serial number
less than 37,101, order spacer 9523.09. Tighten tray with spacer using
the two 3/8-16 nuts.
12-24 x 1/2”Screw
Shoulder Washer
Housing Mount
This product is wa