HP HP 8753E Operation & User’s Manual

HP Rut No. 08753-90367 Supersedes October 1998 Printed iu USA February 1999 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) ® E s ta blished 1 9 8 1 ...

Hewlett-Packard makes no warranty of any kind with regard to this material, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. @ Copy ...

time of shipment from the factory. Hewlett-Packard further certifies that its calibration measurements are traceable to the United States National Institute of Standards and ‘lbchnology, to the extent allowed by the Institute’s calibration facility, and to the calibration facilities of other International Standards Organization members. Wmanty Not ...

Assistance Product maintenance agreements and other customer assktmm agremnmts are available for Hewlett-&hrd products Rw an@ assistance, wnmct gour nearest Hewlett-Rzchmd Saks and Service Om Shipment for Service If you are sending the instrument to Hewlett-Packard for service, ship the analyzer to the nearest HP service center for repair, including a description of any failed test and any error m ...

UNITED STATES Instrument Support Center Hewlett-Packard Company (800) 403-0801 EUROPEAN FIELD OPEEA!l’IONS Headquarters Prame G-m=w Hewlett-Packard S.A. Hewlett-Packard France Hewlett-Packard GmbH 150, Route du Nantd’Avril 1 Avenue Du Canada Hewlett-Packard Strasse 1217 Meyrin Z/Geneva Zone D’Activite De Courtaboeuf 61352 Bad Homburg v.d.H &vi&&and F-91947 Les Ulis Cedex Germany (41 22) 780.8 ...

of the symbols and its meaning before operating this instrument. Caution Caution denotes a hazard. It calls attention to a procedure that, if not correctly performed or adhered to, would result in damage to or destruction of the instrument. Do not proceed beyond a caution note until the indicated conditions are fully understood and met. Warning Rknin ...

Note This instrument has been designed and tested in accordance with IEC Publication 1010, Safety Requirements for Electronics Measuring Apparatus, and has been supplied in a safe condition. This instruction documentation contains information and warnings which must be followed by the user to ensure safe operation and to maintain the instrument in a safe condition. Warning This is a safety Class I product (provided with a prot ...

2 per IEC 1010 and 664 respectively. Caution VENTILATION REQUIREMENTS: When instaIling the product in a cabinet, the convection into and out of the product must not be restricted. The ambient temperature (outside the cabinet) must be less than the maximum operating temperature of the product by 4O C for every 100 watts dissipated in the cabinet. If the total power di ...

� Chapter 1, “HP 8753E Description and Options, n describes features, functions, and available options. � Chapter 2, “Making Measurements,” contains step-by-step procedures for making measurements or using particular functions. � Chapter 3, “Making Mixer Measurements, n contains step-by-step procedures for making calibrated and error-corrected mixer measurements. w Chapter 4, “Printing, Plotting, and Saving Measureme ...

The Installation and Quick Start Guide familiarizes you with the network analyzer’s front and rear panels, electrical and environmental operating requirements, as well as procedures for installing, configuring, and verifying the operation of the analyzer. The User’s Guide shows how to make measurements, explains commonly-used features, and tells you how to get the most performance from your analyzer. The Quick Referen ...

Guide provides a tutorial introduction using BASIC programming examples to demonstrate the remote operation of the network analyzer. The System Vertication and ‘lkst Guide provides the system verification and performance tests and the Performance Test Record for your analyzer. xl ...

According to ISO/IEC Guide 22 and EN 45014 Manufacturer’s Name: Hewlett-Packard Co. Hewlett-Packard Japan, Ltd. Manufacturer’s Address: Microwave Instruments Division 1400 Fountaingrove Parkway Santa Rosa, CA 95403-I799 USA Kobe Instrument Division l-3-2, Murotani, Nishi-ku, Kobe-shi Hyogo, 651-22 Japan Declares that the product: Product Name: Model Number: Product Options: Network Analyzer HP 8753E This declaration covers ...

Where to Look for More Information . . . . . . . . . . . . . . . . . . . . . Analyzer Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Front Panel Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Analyzer Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rear Panel Features and Connectors . . . . . . . . . . . . . . . . . . . . . Analyzer Options Available ...

2-13 Required Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14 Procedure for Characterizing a Duplexer . . . . . . . . . . . . . . . . . . 2-14 Using Analyzer Display Markers . . . . . . . . . . . . . . . . . . . . . . . 2-17 ‘Ib Use Continuous and Discrete Markers . . . . . . . . . . . . . . . . . . 2-17 lb Activate Display Markers . . . . . . . . . . . . ...

2-63 Set Up the Passband Parameters . . . . . . . . . . . . . . . . . . . . . 2-63 Set Up the Upper Stopband Parameters . . . . . . . . . . . . . . . . . . 2-63 Calibrate and Measure . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-64 Measurements Using the Tuned Receiver Mode . . . . . . . . . . . . . . . . 2-66 Typical test setup . . . . . . . . . . . . . . . . . . . . ...

3-33 RF Feedthrough . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-35 4. Printing, Plotting, and Saving Measurement Results Where to Look for More Information . . . . . . . . . . . . . . . . . . . . . 4-2 Printing or Plotting Your Measurement Results . . . . . . . . . . . . . . . . . 4-3 Configuring a Print Function . . . . . . . . . . . . . . . . . . . . . . . . . ...

. . . . . . . . . . . . . . . . . . . . . Saving an Instrument State . . . . . . . . . . . . . . . . . . . . . . . . . . Saving Measurement Results . . . . . . . . . . . . . . . . . . . . . . . . . ASCII Data Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . CITIille . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S2P Data Format. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Re-Savi ...

. . . . . . . . . . . . . . . . . . . . . . 5-36 Compensating for Directional Coupler Response . . . . . . . . . . . . . . . 5-36 Using Sample-and-Sweep Correction Mode . . . . . . . . . . . . . . . . . . 5-37 Using Continuous Correction Mode . . . . . . . . . . . . . . . . . . . . . 5-38 lb Calibrate the Analyzer Receiver to Measure Absolute Power . . . . . . . 5-39 Calibrating for Noninsertable Devices . . . . . . . . . . . . ...

Ratio Calculations . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sampler/IF Correction . . . . . . . . . . . . . . . . . . . . . . . . . . Sweep-lb-Sweep Averaging . . . . . . . . . . . . . . . . . . . . . . . . Pre-Raw Data Arrays . . . . . . . . . . . . . . . . . . . . . . . . . . Raw Arrays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vector Error-corre ...

6-23 Stepped Edit List Menu . . . . . . . . . . . . . . . . . . . . . . . . . 6-23 Stepped Edit Subsweep Menu . . . . . . . . . . . . . . . . . . . . . . 6-24 Swept List Frequency Sweep (Hz) . . . . . . . . . . . . . . . . . . . . . . 6-25 Swept Edit List Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 6-25 Swept Edit Subsweep Menu . . . . . . . . . . . . . . . . . . . . . . ...