HP 5920 Configuration Manual
File Specifications
| Brand: | HP |
| Category: | Switch |
| Model: | 5920 (Configuration Manual), prre8yksOLriI |
| File Type: | |
| File Size: | — |
| Pages: | 56 pages |
Download PDF
Download HP 5920 Manual (56 pages)Read Online:
Read the HP 5920 Configuration Manual online using the built-in PDF viewer.
Key Pages of Document
SPB Configuration Guide Part number: 5998-4678a Software version: Release 23xx Document version: 6W101-20150320 ...
© Copyright 2015 Hewlett-Packard Development Company, L.P. No part of this documentation may be reproduced or transmitted in any form or by any means without prior written consent of Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. HEWLETT-PACKARD COMPANY MAKES NO WA ...
SPBM network model � ...
Enabling dynamic hostname exchange ································· ...
using IS-IS as the control protocol. The technology allows all paths to be active, supports equal cost paths, and provides shortest path forwarding in an Ethernet mesh network. IEEE 802.1aq SPB provides faster convergence, higher link efficiency ...
an MPLS VPN network. BCBs forward MAC-in-MAC frames based on the B-MAC and B-VLAN. They do not learn customer MAC (C-MAC) addresses. BEB Backbone edge bridges (BEBs) are edge nodes of the SPBM network. They are identical to PEs in an MPLS VPN network. ...
MAC-in-MAC SPBM encapsulates Ethernet frames into MAC-in-MAC frames by using 802.1ah PBB encapsulation. For more information about PBB, see Layer 2—LAN Switching Configuration Guide. Customer frames are encapsulated in MAC-in-MAC format at edges of the SPBM network bef ...
SPBM data packets use the IEEE 802.1ah MAC-in-MAC frame format, as shown in Figure 2. Figure 2 IEEE 802.1ah-compliant MAC-in-MAC frame format Table 1 IEEE 802.1ah encapsulated frame header fields Field Description B-DA Destination B-MAC that identifies the destination BEB. B-SA Source B-MAC. It is a known MAC address of the BEB that encaps ...
b. If equal-cost paths are available, each node runs ECT to choose the best forwarding path. c. The nodes populate their respective FDB and FIB tables with the forwarding path. 4. BEBs establish PWs over the SPBM network for transmitting customer traffic. Formation ...
Multicast SPBM floods unknown customer unicast, unknown customer multicast, and broadcast as multicast traffic. SPBM supports the following replication methods for multicast: • Head-end replication—Replicates frames at the ingress BEB for frames to enter the SPBM network. This method is suitable ...
⚠️ Download Safety
The Switch Configuration manual (56 pages) is completely safe to download (last scan date: 29/07/2026).