HP Designjet 3500cp Setup Manual

HP DesignJet 3000CP Printer Setup Guide setup.bk Page 1 Monday, March 30, 1998 10:43 AM ...

C4723-90031 First edition January 1998 Printed in Europe All rights are reserved. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. Adobe™ is a trademark of Adobe Systems Incorporated which may be registered in certain jurisdictions. Adobe PageMaker™ and Adobe Photoshop™ are trademarks of Adobe Systems Incorporated which may be re ...

HP DesignJet 3000CP Printer C4723-90031 (English) setup.bk Page 1 Monday, March 30, 1998 10:43 AM ...

16 Installation, Connection and Configuration Setup Checklist 1 , Check That You Have All the Items Required 2 , Switch On 3 , Load the Ink System Components 4 , Load the Media 5 , Print the Current Configuration Print (Optional) 6 , Connect the Printer to Your Computer 7 , Set Up Your Software 8 , Print a Test File 9 , Extra Tips for UNIX Users 10 , Install Memory Expansion Modules setup.bk Page 1 Monday, March 30, ...

2 Before You Begin Spend a few minutes getting to know the printer and its components from the following illustrations. Additional information for the printer can be found in the User’s Guide. Front View of Printer 00 Window Ink Cartridges (inside) Roll Cover Standby Switch Printhead Cleaners (inside) Front Panel Display Front Panel Media-Entry Slot Media Lever Printheads (inside) Take up reel Media Button setup.bk Page 2 Monday ...

3 Rear View of Printer Pocket for Quick Reference Guide and Media Knife Slots for upgrades Socket for Network Interface Parallel Interface power cord Power Switch Handles for lifting during assembly of the printer setup.bk Page 3 Monday, March 30, 1998 10:43 AM ...

Setup Checklist 4 Setup Checklist You should already have unpacked and assembled your printer, following the Assembly Instructions in the box. Now you can set up the printer using the checklist below as you complete each task explained in this booklet. Task Done? (√) 1 , Check That You Have All the Items Required 2 , Switch On 3 , Load the Ink System Components 4 , Load the Media 5 , Print the Current Configuration Print (Opt ...

Setup Checklist 5 1 Check That You Have All the Items Required You Need the Following Items That Were Supplied with Your Printer. Power Cord The power cord supplied with your printer will meet the plug requirements for your area. However, different power cords (international options) are available. If necessary, contact your dealer or HP Sales and Support Office. Roll Media One roll of HP media. Four Disposable Ink Systems Your prin ...

Setup Checklist 6 2 Switch On The printer’s front-panel menu and all the printer’s internal files are available in the following languages: English, French, German, Italian, Japanese, Portuguese and Spanish. By default the language is English. WARNING Make sure that the power cord supplied with your printer matches your AC power outlet connection. Only use a three-wire (earth-grounded) power cord with this printer. IMPORTANT You ...

Setup Checklist 7 1 Make sure that the power switch at the back of the printer is OFF. 2 Plug the power cord into the socket and then into the AC power outlet. C4704110 setup.bk Page 7 Monday, March 30, 1998 10:43 AM ...

Setup Checklist 8 NOTE If you want your printer to display English in the front panel and in the internal print files, continue with step 3. If you want to change the language go to step 4. If English is OK 3 Switch the printer on by pushing the power switch at the back of the printer, then go to step 5. If there is still no sound from the printer or any lights on the front panel, there is a power problem. If English is not OK 4 Hol ...

Setup Checklist 9 5 When the word “English” appears on the front panel screen, press the ↑ or ↓ key until the language you want appears. Then press the Enter key. 6 Now that you have selected the language for the printer it will continue to initialize and display a front panel message : NOTE:To install the ink system continue with the following procedure. C4704102 C4704030 English LANGUAGE Enter Previous Sheet load --------- ...

Setup Checklist 10 3 Load the Ink System Components WARNING Keep hair, jewelry, clothing, and other objects away from the printer mechanisms. General Information About the Ink System Components CAUTION Do not touch, wipe, or attempt to clean the printhead nozzles.. This can clog and damage the printhead. When installing the ink-system components, it is important that they are all at a similar temperature to the ambient temperature o ...

Setup Checklist 11 Each of the four colors used in the printers’ ink systems contains three separate components. These are: I a printhead I a printhead cleaner I an ink cartridge. The components are numbered to match the sequence in which they must be installed. The number is printed on the sleeve containing the printhead, on the printhead cleaner and the ink cartridge. You must install all three components (printhead, printhead c ...

Setup Checklist 12 Loading the Ink System Now that you have switched on the printer, it will run the initializing procedure and then the front panel will display the following message: 1 Press the Replace ink system key on the front panel and wait for the printhead carriage to move to the access position, at the left of the front panel. 2 The front panel display will then prompt you to install the ink system components in the follow ...

Setup Checklist 13 1 Installing Printheads NOTE Each stall in the printhead carriage has a dot indicating the color. When installing the printheads, you must put the correct color printhead in the matching stall. For users who have difficulty differentiating between colors, the printhead colors can be identified by the part numbers on the boxes. The sequence of the stalls is, from left to right, yellow, cyan, magenta, and black. 1 O ...

Setup Checklist 14 CAUTION Do not touch, wipe, or attempt to clean the printhead nozzles. This can clog and damage the printhead. 2 Take the new printhead and remove the colored protective tape from the printhead’s nozzles. 3 Insert the printhead into the stall with the color dot that matches the color of the printhead label. Press down lightly and push the printhead away from you (toward the back of the carriage) until it snaps i ...

Setup Checklist 15 5 When you have finished installing the printheads, the printer front panel displays the message “Close window to continue”. 6 Close the window of the printer. The front panel will display the message “Open right door to access head cleaners”. Continue with the next procedure, 2 Installing the Printhead Cleaners. setup.bk Page 15 Monday, March 30, 1998 10:43 AM ...

Setup Checklist 16 2 Installing the Printhead Cleaners 1 Open the right door on the printer. After you open the right door, the front panel displays the following message: C4704114 C4704036d Replace Close right door setup.bk Page 16 Monday, March 30, 1998 10:43 AM ...