LB-Link BL-WDR3750 Quick Installation Manual
Text of the manual
1.Connecting the device
Note: Please use wired network connections only to configure the Router.
Connect the WAN port on your Router to the Modem's LAN port with an Ethernet cable.
(If Modem is not available, please connect the incoming cable to the WAN port of the router directly).
Connect your computer to the Port labeled 1~4 on the Router with an Ethe
To enable the touter, please make sure the indicator lights work as same as it shows below.
Note: If any of the LED indicators appear inconsistently, please make sure that the
connection works as it supposes to.
4
WAN:might appears either flashing or solid depending on the connection
of the corresponding port.
LAN:might appears either flashing or s
2.Configuring the device
Note: First of all, please configure your computer's IP address to automatically
obtain, if not clear, please refer to FAQ3.
Login
Open your web browser,input
192.168.16.1 in the address
field and press Enter.
A consequent management
page appears afterward.
1
Login
Cancel
User name:
Password:
User name:admin
Password: admin
Click Log
2.4G Network Name(SSID)
2.4G Password
DHCP
Static
PPPoE
B-LINK-2.4G_XXXXXX
12345678
Configuration for DHCP
A
The page will appear automatically.
Configuration for Static
The page will appear automatically.
B
Please c
Configuration for PPPoE
The page will appear automatically.
C
Note: Till here, the setting for the router has been completed, which means that the
internet is now available. If not, please head to the Troubleshooting (make a page
number)
Select PPPoE
Create a
FAQ1: What should I do if I forget the user name and password?
(How to restore the router 's configuration to its factory default settings.)
Answer: If you forget the user name and password, the only way to solve this problem is to
reset the router. Press and hold the RESET button on the rear panel for 5 to 8 seconds before
releasing it.(