Ingenico EFTBEMi Quick Start Manual

chip upwards. Push the card fully into the slot below the keypad and follow the instructions on screen. If you see a BAD READ message, check the card orientation and try again. After three bad reads the terminal will prompt you to swipe the card. DO NOT remove the card until instructed to do ...

Chip And PIN Transactions - Refund From the idle screen, insert the customers card into the card reader. Enter the sale amount for the transaction and press the green key. For example enter £12.34 as 1234. The customer must enter their PIN code. NEVER ASK THE CUSTOMER TO DIVULGE THEIR PIN CODE After the customer has e ...

End Of Day Reports Press the key, then select MAIL ORDER . Choose either REFUND or SALE . When prompted type the customers card number in and press . Enter the Expiry Date, the Start Date (if required), the Issue Number (if required), pressing after each entry. Enter the Card Security Code (CSC), the n ...

Tips And Advice Hold the terminal securely in one hand. With the other hand, and by using two fi ngers, lift the printer cover release as shown. Fully open the printer cover and remove the old roll of paper. Unstick the end of the new roll, leaving the end free, hold the paper roll and carefully place into the printer compartment. Ho ...