JSI 4250-90-IX Installation Instructions Manual
Text of the manual
OPERATING AND INSTALLATION – MARCH 2013 WWW.JSI-UK.COM
Page 1 of 9
Cooker Hood Range
Model JSI 4250-90-IX (Island Blade)
Please read fully before installation or use
Jan 2014
Version 1 English (UK)
Installation Instructions
User Guide
Warranty Information
OPERATING AND INSTALLATION – MARCH 2013 WWW.JSI-UK.COM
Page 2 of 9
Should your JSI appliance require a repair within
the manufacturing guarantee period please call
01759 487822
Your JSI appliance comes with
a 12 month guarantee
Please REGISTER your appliance online at
www.warrantysolutions.co.uk/jsi
You also have the option to
EXTEND
OPERATING AND INSTALLATION – MARCH 2013 WWW.JSI-UK.COM
Page 3 of 9
Your New Product
Congratulations on buying this new high quality equipment. Please read this Installation and User Manual
fully before assembly.
Please unpack this product and check for any damage. In the unlikely event of damage resulting from
transportation, please
OPERATING AND INSTALLATION – MARCH 2013 WWW.JSI-UK.COM
Page 4 of 9
This appliance should be wired directly to a mains supply with an effective earthing system. This system
must meet local and national safety regulations. As with all electrical appliances, it is recommended that they
are tested regularly by a qualified electrician. T
OPERATING AND INSTALLATION – MARCH 2013 WWW.JSI-UK.COM
Page 5 of 9
Care and Maintenance – Housing Unit
All external surfaces should only be cleaned using warm water with a little washing up liquid applied to a
moist cloth avoiding excess water. Wipe the surface dry using a soft clean cloth
Do not allow water to penetrate the contro
OPERATING AND INSTALLATION – MARCH 2013 WWW.JSI-UK.COM
Page 6 of 9
.
1 Unpack the product
Carefully unpack the product and inspect for any carrier damage.
Avoid the use of sharp instruments such as Stanley knives to cut the
packaging. It is best to retain the packaging until after the installation.
2 Siting of the product
After insta
OPERATING AND INSTALLATION – MARCH 2013 WWW.JSI-UK.COM
Page 7 of 9
Replacing the 20w halogen lamps
Replacing the carbon filters (only for internal recirculation use)
Changing the aluminium filters (for internal recirculation and external extraction)
Operating controls
o Start fan by pressing button
on control panel (1)
o Increase or
OPERATING AND INSTALLATION – MARCH 2013 WWW.JSI-UK.COM
Page 8 of 9
o When the aluminium filter is “dirty”, the warning is given by displaying the letter C on the
display panel (3). When the filters are cleaned, dried and re-fitted, button 1 should be pressed
for 3 seconds when the product is off to clear the C letter on the displ
OPERATING AND INSTALLATION – MARCH 2013 WWW.JSI-UK.COM
Page 9 of 9
Decorative hoods are designed by and manufactured for JSI-UK in Turkey
www.JSI-UK.com for further information.
JSI-UK Limited. Sherston, Wiltshire, United Kingdom. SN16 0LW
Enquiries to; [email protected]
TECHNICAL SPECIFICATIONS
Size Options
90cm
Constructi