AEG Electrolux ESL 9160 Instruction Book

D i s h w a s h e r Bedienungsanleitung Seite 2 Instruction book page 21 Model ESL 9160 CH ...

22 Installation instructions 23 Building-in 23 Levelling 23 Fixing to the adjacent units 23 Water supply connections 23 Water unlet hose with safety valve 23 Water outlet hose connection 24 Electrical connection 24 Description of the appliance 25 The control panel 25 Audible signals 27 ...

appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the ...

this appliance should be carried out by a qualified electrician and/or plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. Building-in This dishwasher is designed to be fitted under a kitchen counter or work ...

The end of the drain hose can be connected in the following ways: 1. To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine. 2. To a stand pipe provided with vent-hole, minimum internal diameter 4 cm. The waste connection must be at a maxim ...

Function buttons: in addition to the selection of the washing programme, "half load" option and "delay start" option, the following functions can also be set with the help of these buttons: - the setting of the water softener, - activation/deactivation of the rinse aid dispenser, - deactivation/activation of the audible signals. "Programme ...

when only a few dishes need washing reducing the consumption of water and energy. This option must be linked to the selection of a washing programme. Remember to load both baskets. With the use of this function, the cycle durations change. In this case, in the digital display, the indication of the run ...

operations the dishwasher is performing: - setting of the water softener - end of programme - intervention of an alarm due to malfunction Deactivation/activation of the audible signals (The dishwasher must be switched off) Factory setting: audible signals activated 1. Press the On/Of ...

1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with dishwasher salt 5. Fill the rinse aid dispenser NOTE: If you want to us ...

Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes. This will prevent any grains of salt or salty water, which m ...