Hamlet HN05S Operation & User’s Manual
Text of the manual
thanks for choosing a Hamlet product. Please
carefully follow the instructions for its use and
maintenance and, once this item has run its life
span, we kindly ask You to dispose of it in an
environmentally friendly way, by putting it in the
separate bins for electrical/electronic waste, or
to bring it back to your retailer who will collect
Hamlet HN05S/HN08S is a high-performance Fast
Ethernet switch with all ports capable of 10 or 100 Mbps
auto-negotiation (NWay) operation, which means the
switch could automatically negotiate with the connected
partners on the network speed and duplex mode.
It is ideal for micro-segmenting large networks into smaller,
connected subnets for impr
Before you start to install the switch, check the following
contents in this package.
• One 5/8-Port Fast Ethernet switch
• One external power adapter
• User’s Manual
Features
• Complies with 10BASE-T specifications of the IEEE
802.3 standard
• Complies with 100BASE-TX specifications of the IEEE
802.3u standard
• 5/8 × 10/10
Please refer to the following table for LEDs definition.
5-port switch
8-port switch
LED
Status
Operation
Power
Steady Green
The switch is powered on
Off
The switch is powered off
Link/Act
Steady Green
Valid port connection
Blinking Green
The port transmitting or
receiving data.
Off
Port disconnected
Connect each station to the switch by twisted-pair cable.
Plug one RJ-45 connector into a port of the switch and plug
the other RJ-45 connector into the station’s network
adapter.
Connect the power adapter supplied with the product to the
power input on the back of the switch and then to a wall
electrical outlet.
The switch is powered
IEEE802.3x full duplex flow control
IEEE802.3az draft (HN05S only)
Interface
5x 10/100 Mbps RJ-45 ports (HN05S)
8x 10/100 Mbps RJ-45 ports (HN08S)
Network
Data Rate
10/100 Mbps Auto-negotiation
Transmission
Mode
10/100Mbps: Full-duplex, Half-duplex
Buffer Memory 384K bits (5-port)
768K bits (
This Equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio
fr