PROLiNK PRT7007L Quick Installation Manual

Portable 4G LTE WiFi Hotspot MODEL NO: PRT7007L Version 1.00 (English / Indonesian) BEFORE GETTING STARTED This document is designed to aid you to get started with the device. If you experience problems following these guides or need further information pertaining to the device, please visit our website at www.prolink2u.com. All spec ...

Items: One (1) PROLiNK® PRT7007L with built-in 2300mAh Lithium (Li-ion) Battery One (1) unit of USB Cable One (1) piece of Quick Installation Guide (QIG) 1 2 3 Note: 1. The illustrations in this document may appear different from your model. 2. If any of above item is not packed in your package when open, please consult your reseller imm ...

1. SIM/USIM Card Slot / Reset Button 2. WPS Button 3. Power Button EN 2 2 3 4 5 6 7 4. LCD Screen 6. Charger/USB port 7. AUX Antenna Connector 8. Main Antenna Connector Indicators When the device is powered on, the following icons may be displayed on the LCD screen. For a description of the icons, refer to the following ...

EN 3 1 2 3 Network in use. One or more new messages are received. Wi-Fi status and the number of connected users. Battery power. Inserting SIM Card 1. Open the SIM (or USIM) card cover. 2. Insert a SIM (or USIM) card to the card slot, you will hear a click sound when the SIM (or USIM) card is locked in place. 3. Close the ...

Note: 1. If the system does not launch installation automatically, you can run the installation program in the path of My Computer > PROLiNK 4G. 2. The driver of your device will be installed at the same time. PRT7007L supports three working modes. i. USB Mode – Connection via the USB cable. • Connect your device to the clie ...

Power on your device directly. It will take 1~2 minutes to initialize. Use your normal Wi-Fi application on the client to search for the available wireless network. Select the SSID of your device (default SSID is PROLiNK_PRT7007L_xxxxx), and then click Connect. The password is set as prolink12345 by default. The WAN ...

4. Web-based Confguration iii. Mixed Mode – Connection via both USB and Wi-Fi This is a combination of using the USB cable and Wi-Fi connection. Input the case-sensitive default password “password”, and then click Login to access the WebGUI configuration page. Accessing the WebGUI Configuration Page Make sure the connectio ...

Network Selection or APN Setting. Select Settings > Wi-Fi Settings Change the basic wireless network settings, choose security mode and WPA type, and perform the WPS configuration. Select Settings > Device Settings Change the Administrator settings, restore factory default, manage PIN or set the ...

i. Under Settings > Wi-Fi Settings > Basic Settings, select Enable for Multi SSID Switch and click Apply 4. Web-based Confguration Select Settings > Firewall Set the Mac/IP/Port Filtering, Port Forwarding or the System Security configuration. Select Settings > Router Settings Change Router LAN IP and DHCP settings. Selec ...

Enable for Multi Band Switch and click Apply 4. Web-based Confguration EN 9 ...