PSP Master Comp Instruction Manual

Text of PSP Master Comp Instruction Manual

Sakis Anastopoulos DigisoundMastering, Victoria, Australia

Joachim Krukowski Jarocin, Poland Hubert Pietrzykowski PSPaudioware.com s.c., Warsaw, Poland ___________________________________________________________________ PSP MasterComp & PSP MicroComp operation manual 2

End User License Agreement

PREFACE: This End-User License Agreement (“EULA”) is a legal agreement between you and PSPaudioware.com s.c. (PSP) for the PSP product accompanying this EULA, which includes computer software and may include associated media, printed materials, and “online” or electronic documentation (“SOFTWARE”). By installing, copying, or using the SOFTWARE, you agree to be bound by the terms of this EULA. If you do not a

Table of Contents

PSP Master Comp PSP MicroComp ........................................................................................................................ 1 Table of Contents ................................................................................................................... 4 Overview ................................................................................................................................ 5 Features .

PSP Master Comp and PSP MicroComp are high fidelity stereo dynamic processors that

feature a wide range of controls to make them versatile tools for mastering compression and expansion, as well as great for using on buses and track processing during mixing. Features PSP MasterComp  Total high frequency transparency thanks to double sampled processing (excluding output limiter)  Low distortion due to our optional Smooth Level Detector algorit

Minimum System Requirements

PSP MasterComp and PSP MicroComp are compatible with applications that can host standard VST, AU and RTAS plug-ins. Windows  Intel or AMD processor  (i386 architecture compatible high performance CPU recommended)  Windows XP, Vista or se7en 32 and 64 bits  RTAS, or VST compatible audio application  VST for x64 applications Macintosh  PowerPC or Intel processor  Mac OS X 10.5 or later  AU, RTAS, or VST co

PSP MasterComp’s and PSP MicroComp's meters contain VU and PPM needle readings,

contextual numeric readings which are held for two seconds, and overload LED indicators that are held until reset. All main parameters of meters are rear panel controlled. VU is mainly indicated by a long black needle and the contextually displayed number on the left part of the meter. PPM is mainly indicated by a short red needle and the contextually displ

The LEDs react according to rear panel’s overs counter setting, which means that when PPM

integration time is greater then 0ms and overs counter is set to low values the LEDs may blink often while the PPM level is still below 0dBFS. The opposite situation may also occur when PPM integration is set to 0ms and it reads over 0dBFS; in this case the LEDs do not blink at all because they are waiting for the minimum number of overloaded samples. After an overl

PSP Master Comp Lets you Set the compression/expansion ratio. There are 21 steps available including 14

compression ratios ranging from 1.2:1 to ∞:1 omitting compression 1:1, and 6 expansion ratios up to 0.5 : 1. Attack Sets an attack time within a wide range from 0.01ms to 1s. Sets a nominal attack time for automated attack mode. Auto Attack button (PSP MasterComp only) Engages automated attack adjustment mode. In this mode the Attack control sets a nom

Controls the post compression/expansion make-up gain. The make-up gain occurs in the

signal chain before the mix control, output gain and the output limiter. Auto Makeup Engages the automated makeup control which uses a set ratio and threshold. Due to the fact that some manual calibration may still be needed, a Makeup control can be used for this purpose. Caution! Turning on Auto Makeup may produce a sudden considerable gain change and corresponding

PSP Master Comp High s.c. filter switch (PSP MicroComp only)

This is a three state switch. The “_/” position activates a high frequency boost in the side chain signal to increase response on sibilants. Use this setting whenever extra attenuation on higher frequencyiesis needed for instance during de-essing. The “--” position activates a flat response low frequency side chain filter. Use setting for most individual tracks, groups and entire mixes. The“\_” pos

PSP Master Comp Mix (PSP MasterComp only)

Sets the amount of processed signal (post make-up) and input signal sent to the output level control and output limiter. This allows to dial in a transient transparent sound with gently processed middle dynamic ranges. Output Controls the output gain of the signal just before the output limiter in PSP MasterComp and just before the output in PSP MicroComp. On/Off Engages or disengages processing. When set to off, metering still o

Switches between standard hard and soft knee compression/expansion curves.

In PSP MicroComp a soft knee mode is engaged when a button is lit. Peak/RMS switch (PSP MasterComp) or RMS button (PSP MicroComp Switches between peak and RMS responses of the level detector. In PSP MicroComp an RMS mode is engaged when the button is lit. Caution! Switching between Peak and RMS detection has to reset and switch its internal processing and may produce sudden gain dr

Plugin Information Plate

This shows the plug-in name, its version number, and authorization details. Clicking here switches back to the front panel. Knobs 0VU Reference Level The 0VU Reference Level knob sets the sine wave reference level. The default value is -14dBFS. This value is stored as a preference setting. PPM integration time The PPM integration time knob sets the attack ballistics for the PPM meters. The default value is 10ms. This val

The Overload counter knob sets how many overloaded samples it will take to make the

overload LEDs light. The default value is 3 samples. This value is stored as a preference setting. PSP MasterComp & PSP MicroComp operation manual 15

Working with meters

PSP MasterComp and PSP MicroComp meters are designed to work similarly to real VU and PPM meters and overs indicators. To ensure that they can be a useful tool in every situation we endowed them with a set of parameters which allow you to adjust the meters' behavior to every practical situation. To learn more about those adjustable parameters please refer to the Controls -> Rear Panel section of this manual. Standard VU meters

PSP MasterComp and PSP MicroComp are provided with a factory set of presets. Those

presets were prepared by professionals and are designed for various purposes and highlight different features of the plug-in. The first aim of these presets is to show customers the features of the plug-in and help them to learn the controls of the plug-in. In addition, the presets can be used as a starting point for further adjustments or as quick fix presets.

PSP Master Comp If you have any questions about the principles or operation of our plug-ins, please visit our

website www.PSPaudioware.com where you can find the latest product information, free software updates and answers to the most frequently asked questions. You can also contact us by e-mail: [email protected]. We will gladly answer all of your questions. As a rule we respond within 24 hours. PSPaudioware.com s.c. Kwadratowa 4/19 05-509 Józefoslaw P

PSP Recording Equipment Owners Instructions: