Technics SU-C01 Operating Instructions Manual
Text of Technics SU-C01 Operating Instructions Manual
SU-C01 K is different in appearance and color-tone.
Before operating this unit, please read these instructions completely.
• BEFORE USING THIS UNIT
. . . . . . .
.
. . . . . .. . . . . . . . . . . . . 2
• FOR UNITED KINGDOM
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
• FOR AUSTRALIA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
• FOR LONG AND SAFE USE OF THIS UNIT
. . . . . . 2
• MAINTENANCE OF EXTERNAL SURFACES
. . . . . . 4
•FRONT PANEL CONTROLS AND
THEIR FUNCTIONS
. . . . . . . . . . . . .
Dear Stereo Fan
We want to thank you for selecting this product and
to welcome you to the growing family of satisfied
Technics product owners around the world.
We feel certain you will get maximum enjoyment from
this new addition to your home.
Please read these operating instructions carefully,
and
be sure to keep them handy for convenient
reference.
BEFORE USING THIS UNIT
Use a minus (-)screwdriver to set the voltage selector (on
the rear panel) to the
FOR LONG AND SAFE USE
OF THIS UNIT
(continued)
3) AC OUTLETS ON REAR PANEL
(NOT EQUIPPED FOR SOME COUNTRIES)
• Any equipment connected here should have
specified power consumption or less.
These outlets are exclusively for the connection of other
audio equipment, such as a tape deck. Be sure the power
consumption of each does not exceed wattage specified
near the AC outlets.
• Never connect other electrical appliances such as
an iron or toaster.
If app
10) AVOID SPRAY-TYPE INSECTICIDES
Insecticides might cause cracks or "cloudiness" in the
cabinet and plastic parts of this unit. The gas used in such
sprays might, moreover, be ignited suddenly.
X
IF TROUBLE OCCURS
11) NEVER USE ALCOHOL OR PAINT THINNER
These and similar chemicals should never be used to clean
the cabinet, because they may damage the finish.
If, during operation, the sound is interrupted or indication
lamp no longer illuminates, or if abno
FRONT PANB.. CONTROLS
AND THEIR FUNCTIONS
�
0 "push on" switch {for United Kingdom)
"power stand-by <.0 • on" switch
8 Tone controls
$ High-filter switch
0 Subsonic filter switch
0 Loudness switch
high
, IUt'IIOr c htler kx :tness
� :
:
l:!l
t;;:l
0 "push on" switch {for United Kingdom)
"power stand-by <.b
• on" switch
This switch turns on and off the secondary
circuit
only.
Regardless of the switch setting, the primary
circuit is always "live" as
8 High-filte.r switch (high filter)
Set this switch to the "on" position (.a�..a) to eliminate
such high-frequency noises as "scratch" noise caused
by dirt and dust on discs, "hiss" noise heard from tapes,
etc.
8 Subsonic filter switch (subsonic filter)
Set this switch to the "on" position (.a-..a) to eliminate
such ultra-low-frequency noises as distortion caused
by a warped disc (which causes excessive vibration of
the woofer cone), motor "rumble," etc.