Toro 51480A Operator's Manual
File Specifications
| Brand: | Toro |
| Category: | Trimmer |
| Model: | 51480A (Operator's Manual), prubE897IDre. |
| File Type: | |
| File Size: | — |
| Pages: | 12 pages |
Download PDF
Download Toro 51480A Manual (12 pages)Read Online:
Read the Toro 51480A Operator's Manual online using the built-in PDF viewer.
Key Pages of Document
14in Electric Trimmer Model No. 51480A—Serial No. 315000001 and Up Operator's Manual If you have questions or problems, call toll free 1-888-367-6631 (US), 1-888-430-1687 (Canada), or 1-800-450-9350 (Mexico) before returning this product. General Safety Rules WARNING: When using electric gardening appliances, basic safety precaution ...
the risk of starting the power tool accidentally. D. Remove the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. E. Store idle power tools out of the reach of ...
wet conditions; do not use if the cord is damaged; wear eye protection. 131–0361 3 ...
Procedure Description Qty. Use Auxiliary handle 1 Latch 1 1 Brace 1 Install the auxiliary handle. Guard 1 2 Phillips screw 1 Install the guard. 3 Edge guard 1 Install the edge guard. 4 No parts required – Adjust the trimmer height and the base position. 1 Installing the Auxil ...
3 Installing the Edge Guard Parts needed for this procedure: 1 Edge guard Procedure Insert the ends of the edge guard into the holes in the trimmer housing as shown in Figure 3. G017621 1 Figure 3 1. Edge guard 4 Adjusting the Trimmer Height and Base Position No Par ...
latch, then slide the shaft up or down to desired height, securing it in place with the latch (Figure 4). • To adjust the position of the base, press down on the rotator button located at the base of the sha ...
Disconnect the string trimmer from the power supply, then push the red button at the base of the spool retainer while pulling on the trimmer line to manually advance the line. Trimming Figure 8 Edging To convert the trimmer to an edger, press the rotator button and rotate the head as shown in Figure 9. 1 2 G015660 Figure 9 1. Rota ...
3. Remove the spool. 4. Install the new spool, making sure that the strings are captured in the retaining slots on the new spool. Note: Make sure that the ends of the strings extend approximately 152 mm (6 in). 5. Install the new spool so that ...
⚠️ Download Safety
The Trimmer Operator's manual (12 pages) is completely safe to download (last scan date: 06/06/2026).