Starkey SurfLink Manual 

Power Streaming Activation Control Volume Control Microphone RCA Jacks Optical S/PDIF Monaural/Binaural Power TOSLINK Selection Back View Read This First SurfLink Media can be connected to most media sources, including televisions, radios, and MP3 players. This guide provides ea ...

RCA Cable Installation (most common connection option) � 1.� ��Connect�the�red�and�white�RCA�cable�plugs�into�the�corresponding� red�and�white�RCA�jacks�(labeled�2)�on�SurfLink�Media. � 2.� ��Select�the�signal�type�as�Monaural�or�Binaural�au ...

Optical/TOSLINK Installation � 1.� ��Connect�the�optical/TOSLINK�cable�into�the�optical/TOSLINK� “AUDIO�OUT”�port�(labeled�3)�on�the�media�source. � 2.� ��Select�the�signal�type�as�Monaural�or�Binaural�audio� stream based on your hearing system ...

1. Plug the power adaptor into the wall socket or other power source. � 2.� �Connect�the�power�cord�using�the�Power�port�(labeled�5)�on�the�back�of�SurfLink�Media. 3. Press the power button on the front of SurfLink Media. The power button glows blue when the device is on. Power Streaming Ac ...

Volume Control The�volume�of�the�media�source�streaming�to�your�hearing�instruments�can�be�adjusted�by� using�the�Volume�Control.�Slide�your�finger�to�the�right�to�increase�the�volume�and�to�the�left� to decrease the volume. The blue light indicates the v ...