Subaru EyeSight Quick Reference Manual
Text of Subaru EyeSight Quick Reference Manual
The stereo camera lenses are precision components. When the system detects that the
stereo camera lenses are dirty, no EyeSight functions will be activated.
Always observe the following precautions:
• Do not touch or try to clean the EyeSight camera lenses inside the vehicle. Extra precaution
should be used when cleaning the inside of the windshield. Over-spray from cleaners may
impair or even damage the cameras’ lenses.
• Do n
There must be no oil film, dirt, scratch or fogging that obstructs the forward visibility of the
stereo camera.
Do not stick or attach aftermarket parts on the prohibited areas shown in gray on the
windshield and top of the dashboard.
Even outside the prohibited area, if the abnormal operation occurs due to the reflection of the
light or the reflection on the glass, change the adhering position or installation position.
• Application of sticker
Issued May 2015
Printed in USA 05/15
EyeSight® is a driver assist system that may not operate optimally under all driving
conditions. The driver is always responsible for safe and attentive driving. System
effectiveness depends on many factors such as vehicle maintenance, tire condition, and
weather and road conditions. See the Owner’s Manual for complete details on system
operation and limitations.
All information contained within this EyeSi
Quick Reference Guide
WRX
2016
Love. It’s what makes a Subaru, a Subaru.
1989986_16a_Eyesight_WRX_STi_QRG_031915.indd 4
3/19/15 9:42 AM
Subaru EyeSight Pre-Collision Braking System
This function can recognize an impending collision with a vehicle or obstacle in front of
the EyeSight vehicle, alert the driver and even automatically apply the brakes to help avoid
a collision or minimize the impact when a collision is inevitable.
Pre-Collision Brake Assist
If EyeSight recognizes an impending collision with a vehicle or obstacle in front of the
EyeSight vehicle, and the driver is applying t
Subaru EyeSight Steering Wheel Controls
INFO/SET switch
Use the arrows above and below to set or view information on various functions in the
multi-information display.
Cruise Control switch
Press to turn Adaptive Cruise Control on or off.
RES/+ switch
Press to resume set speed or to increase set speed while in either Adaptive or
Conventional Cruise Control.
SET/- switch
Press to set the current speed or to reduce set speed while in either Adaptive or
Conv
Warning OFF light
Pre-Collision Braking
System OFF light
When these functions are off, the indicator light
on the instrument panel illuminates (see right).
Pre-Collision Braking
System OFF switch
Press and hold this switch to turn off
the Pre-Collision Braking System and
Pre-Collision Throttle Management.
Press and hold the button again
to turn the systems back on.
Lane Departure
Warning OFF switch
Press and hold this switch to turn
off the
Location of Stereo Cameras
1989986_16a_Eyesight_WRX_STi_QRG_031915.indd 8
3/19/15 9:42 AM