Swisscom Aton CL116 Operation & User’s Manual

Overview of handset 2 3 5 4 6 13 10 1 12 9 11 8 7 i à V 07:15 INT 1 14 Oct Calls Calendar 1 Display in idle status 2 Status bar (¢ page 52) Icons display current settings and operating status of the phone 3 Display keys (¢ page 17, ¢ page 31) 4 Message key (¢ page 18) Access to the calls and message lists; Flashing: new message or new call 5 End call key, On/off key End call; Cancel function; Go back one menu level (press briefly ...

Overview of base station Aton CLT116 base station 1 Display Lit up: The answer machine is activated. The number of saved messages is displayed. 00 flashing: The answer machine is recording a message. Flashing slowly: There are new messages. The number of new messages is displayed. 99 flashing quickly: The answer machine is full. 2 On/Off/Playback/Stop key Switch answer machine on/off (press and hold); Play new messages if availab ...

Aton CL116 base station Registration/paging key u Locate handsets ("Paging") (press briefly) ¢ page 40. u Register handsets and DECT devices (press and hold) ¢ page 39. ...

Overview of base station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

Explain their content and the potential hazards associated with using the telephone to your children. Only use the mains adapter supplied, as indicated on the underside of the base. Only use the recommended, rechargeable batteries as this could otherwise result in significant health risks and personal injury. Using your telephone may affect nearby med ...

Information about disposal Batteries should not be disposed of in general household waste. Observe the local waste disposal regulations, details of which can be obtained from your local author- ity or the dealer you purchased the product from. At the end of its service life, this product must not be disposed of with normal household waste, but must be handed in at the place of purchase or at a collection po ...

u One base station, u One power adapter for the base, u One phone cord, u One handset, u One battery cover (rear cover for the handset), u Two batteries, u One belt clip, u One user guide. If you have purchased a model with multiple handsets, the package should contain two batteries, a battery cover, a belt clip and a charging cradle with power adapter for each additional handset. Setti ...

mains power supply Mounting the base station on the wall (optional) ¤ Insert the phone cable into the con- nection socket at the rear of the base until it clicks into place and feed under the cable protection. ¤ Insert the power cable for the power adapter into the connection socket at the rear of the base and rotate the right-angle plug under the cable protection. ¤ Connec ...

Setting up the handset for use The display is protected by a plastic film. Please remove the protective film! Inserting the batteries and closing the battery cover ¤ Connect the flat plug to the charging cradle . ¤ Plug the power adapter into the power socket . If you have to remove the plug from the charging cradle again: ¤ Disconnect the power adapter from the mains power supply. ¤ Press ...

u To attach — press the belt clip onto the back of the handset so that the tabs on the belt clip click into place in the notches. u To remove — press the centre of the belt clip firmly with your right thumb, push the fingernail of your left thumb up between the clip and the casing and pull the clip in an upward direction. Charging the batteries The batteries are ...

You can also change the display language via the menu: v ¤ Ï ¤ OK ¤ q Language ¤ OK ¤ q Select language ¤ Select or, if you do not understand the language currently set, go to: ¤ Press and hold the End call key a to return to idle status. ¤ Press right on the control key. ¤ Press keys L and 5 slowly one after the other. The language selection display appears. The current language (e.g. English) is ...

Set the date/time so that the correct date and time can be assigned to incoming calls, and so that you can use the alarm. ¤ Press the key Time below the display screen to open the input field. (If you have already set the date/time, open the input field via the menu: v ¤ Ϥ OK ¤ Date/Time ¤ OK) The submenu Date/Time is shown on the display. ¤ The active input position flashes. Enter the day, month and yea ...

You can connect a headset with 2.5 mm jack connectors. Display shows: Saved. You will hear a confirmation tone. Date/Time ‰ Saved i à V 07:15 INT 1 14 Oct Calls Calendar You will automatically return to idle status. Your phone is now ready for use. ...

After successfully setting up the phone, you can make calls straight away, customise your tele- phone according to your requirements or firstly familiarise yourself with the operation. If you have any questions about using your phone, please read the tips on troubleshooting (¢ page 57) or contact our Customer Service team (¢ page 56). Setting ringtones Assign specific tunes to internal and external calls ...

Understanding the operating steps in the user guide The keys on your handset are set out in these operating instructions as follows: c / v / a Answer call key / Menu key / End call key Q to O Number / Letter keys * / # Star key / Hash key f / S Message key / Recall key Overview of display icons (¢ page 52). Example: Activating/deactivating Auto Answer Illustration in the user guide: v ¤ Ï ¤ OK ¤ q ...

Getting to know your phone Switching the handset on/off ¤ Press and hold the End call key a in idle status to switch the handset on or off. Locking/unlocking the keypad The keypad lock prevents any accidental use of the phone. If you press a key when the keypad is locked, a message is displayed. ¤ Press and hold the # key to lock or unlock the keypad. If a call is signalled on the handset, the keypad automatically unlocks. a ...

Display keys The display keys have a function preset by default in idle status, but the keys can be re-assigned (¢ page 31). The functions of the display keys change depending on the operating situation. Example Some of the important display keys are: Options Open a menu for further functions. OK Confirm selection. Back Skip back one menu level or cancel operation. Save Save entry. Overview of icons on the display keys (¢ pa ...

Submenus The functions in the submenus are displayed as lists. To access a function: ¤ Scroll to the function using the control key q and press OK. Returning to the previous menu level: Briefly press the display key Back or End call key a. Returning to idle status From any menu: ¤ Press and hold the End call key a. Or: ¤ If you do not press a key, the display automatically returns to idle status after 2 minutes. Message lis ...