Swisscom Aton C30 Manual 

2. Handset hook 3. Keypad 4. Handset cord socket 5. Handset volume 6. Recall 7. Volume boost 8. Call memory / OK 9. Delete 10. Mains adapter socket 11. Ring tone 12. Ring melody 13. Ring volume 14. Speed dial keys 15. Phone book 16. Handset tone 17. Speaker volume 18. Speakerphone 19. UP/DOWN 20. New call indicator 21. Ringer indicator English ...

2. Languette de support du combiné 3. Clavier 4. Prise du cordon du combiné 5. Volume du combiné 6. Touche R 7. Amplification du volume 8. Journal des appels / OK 9. Effacer 10. Prise du bloc d'alimentation 11. Tonalité d'appel 12. Mélodie 13. Volume de la sonnerie 14. Touches mémoires directes 15. Répertoire 16. Tonalité du combiné 17. Volume du haut-parleur 18. Mode mains libres 19. HAUT/BAS 20. Témoin d’appel en absence 21. Témoin de la sonnerie Français 1. Presa linea telefonica 2. Gancio cornetta 3. Tastiera 4. Presa cavo cornetta 5. Volume cornetta 6. Recall (funzione richiamata) 7. Volume amplificat ...

telephone. Handset tone control, volume boost, enhanced ring volume and visual call indication make the telephone well suited for people with hearing difficulties. The extra-large keypad and easy to read display with large characters make the telephone easy to use even with impaired eyesight. The built-in phonebook can store up to 30 names and numbers. Three one touch memory keys can be programmed for frequently used numbers or emergency numbers. A call memory logs the 15 most recently incoming and outgoing calls. A speakerphone function allows you to talk hands-free w ...

marked y on the telephone. 2. Connect the telephone line cord to a network wall socket and to the K socket on the back of the telephone. 3. Connect the mains adapter* to the mains power wall socket and to the DC 9V socket on the telephone. 4. Lift the handset and listen for the dial tone. Batteries Four AA alkaline batteries are needed for the call memory and speakerphone in the event of a power cut. When BATT. LOW is displayed, replace all 4 batteries. Use only AA alkaline batteries of good quality (not included). Note! Before installing or changing the batter ...

settings should be made. After confirming a setting, the next setting is automatically displayed. To skip to the next setting, press . The phone will return to standby mode after 30 seconds of inactivity or when pressing . On first setup the display clock will show 00:00. 1. Press and hold * for about 5 seconds until the hour flashes. 2. Use v / V to change the value and confirm with . 3. Repeat steps 1–2 to set the minutes, day and month. ENGLISH is displayed. Use v / V to select the desired language, then confirm with . ...

(1–4), and confirm with . KEYT. ON Use v / V to set key tone ON/OFF, and confirm with . -100- FLASH Use v / V to set the flash key time (100/300/600 ms) and confirm with . The standard setting is 100 for Switzerland. LED OFF Use v / V to enable/disable the LED indicator for new calls, and confirm with . TONE Use v / V to select either tone or pulse dialling mode, and confirm with . Note! If unsure of which mode to use, select TONE as this works in most locations. ...

wall mount bracket and two screws (not included). Warning! Make sure that no cables, water pipes or gas pipes are located inside the wall before drilling into it. 1. Drill two holes in the wall, vertically 83 mm apart. 2. Insert the screws, allowing them to project ~5 mm out from the wall. 3. Unplug and remove the handset. 4. Fit the guide tabs (A) on the bracket into the slots (B) on the back of the telephone, then slide the bracket upwards until it snaps into place. B A ...

into the slots in the bracket, then slide the telephone downwards until it is hanging on the screws. 6. Remove the handset hook (C) by pushing it upwards, and insert it in the reversed position so that the small tab (D) protrudes. The hook will now keep the handset in the cradle when the phone is wall mounted. C D C 7. Reconnect the handset and place it in the cradle. Note! If the phone is to be used as a desktop phone again, remember to reverse the position of the handset hook. ...

Normal dialling 1. Lift the handset. 2. Dial the number. Hang up the handset to terminate the call. Speakerphone Note! The speakerphone only works when batteries are installed or mains adapter is connected. 1. Press s to activate the speakerphone. The LED next to the key will light up. 2. Dial the number. Press s again to terminate the call. Lift the handset to switch from speaker to handset during a call. Pre-dialling 1. Enter the number. Press to delete the last entered digit. 2. Lift the handset or press s to dial. Quick redial 1. Lift the handset or press s. 2. Press to redial the last dialled number. ...

1. Press to display the most recent call. 2. Use v / V to scroll through the last 15 incoming and outgoing calls. = Incoming call = Outgoing call 3. Lift the handset or press s to dial the displayed number. Speed dial (one-touch dialling) 1. Press one of the speed dialling keys A/B/C. The stored telephone number is displayed. 2. Lift the handset or press s to dial. Dialling numbers in the phone book 1. Press b to open the phone book. 2. Use v / V to browse through the phone book, or enter the first character in the name to quickly find an entry (see Keypad characters). 3. Lift the handset or press s to d ...

of the telephone. The handset volume control is located under the handset. Keypad characters ...

is full, ----100% is displayed. Storing numbers in the phone book 1. Press and hold b until a blinking cursor is shown. 2. Enter a telephone number (up to 22 digits). Use v/V to move the cursor and to erase if needed.Use # to insert a pause in the number. 3. Press to confirm. A blinking cursor will be shown on the second line on the display. 4. Enter a name (up to 9 characters) for the number to be stored (see Keypad characters). 5. Press to confirm. OK is now displayed. 6. Repeat steps 1–5 to store another number, or press and hold to exit. Dele ...

1. Press b to open the phone book. 2. Use v/V to browse through the phone book, or enter the first character to quickly find an entry. 3. Press and hold b until the blinking cursor appears. 4. Use v/V to move the cursor, and use and the keypad to erase and enter new data. 5. Press to confirm. The cursor will move to the second line. 6. Repeat step 4 to edit the name/description. 7. Press to confirm. OK is displayed. Storing speed dial numbers 1. Press and hold one of the speed dialling keys A/B/C until a blinking cursor is shown on the first line on the display. 2. Enter a telephone number (up to 22 digit ...

Caller ID allows you to see who is calling before you answer and to see who has called in your absence. Note! The Caller ID function must be subscribed. Please contact your network operator for more information. The call memory will store the last 15 incoming and 15 outgoing calls. On the display, incoming (answered and unanswered) calls are indicated with and outgoing calls with . If the Call Indicator function is active, a blinking light indicates that an unanswered call has been received since the call memory was last checked. Browsing the call memory 1. Press then v / V to scroll through the call memory. The n ...

on your hearing aid to enable this feature. Recall key (R) ABC2 1 DEF3 JKL5 GHI4 MNO6 TUV8 PQRS7 WXYZ9 0 # A B C C 5 4 3 R R Press the R key followed by the extension number to transfer a call when connected to a PBX system. Additional network services may be accessible by using the R, * and # keys. Please contact your network operator for more information about the available network services. Volume Boost The handset volume can be raised another 10 dB by pressing the Volume Boost key while talking. The LED indicator on the key will light up. Press the key again or termi ...

Your unit is a technically advanced product and should be treated with the greatest care. Negligence may void the warranty. • Protect the unit from moisture. Rain/snowfall, moisture and all types of liquid can contain substances that corrode the electronic circuits. If the unit gets wet, you should remove the battery and allow the unit to dry completely before you replace it. • Do not use or keep the unit in dusty, dirty environments. The unit’s moving parts and electronic components can be damaged. • Do not keep the unit in warm places. High temperatures can reduce the lifespan for electronic equipment, damage b ...

warranty card, filled out and stamped by the place of purchase must accompany the faulty device. Excluded from the warranty are damages due to improper use, wear and tear or tampering by others. The warranty does not include consumable materials and faults that have only an insignificant affect on the value or usability of the product. In case of errors, please contact your place of purchase. Repair/Maintenance Rental devices If your phone does not operate properly, notify Technical Assistance (phone number 0800 ...

Weight: 750 g (including batteries) Battery: 4 x 1.5 V AA Alkaline batteries Conformity This device is intended to be operated on the analogue Swiss network. Country-specific conditions have to be taken into account. If you have any questions about the differences between the public phone networks, please contact your specialist dealer or network provider. Swisscom hereby declares that this device meets the essential requirements and other relevant regulations laid down in Directive 1999/5/EC. The Declaration of Conformity can be found the following web site: www.swisscom.ch under the rubric “On ...

Wand montiert werden. Durch eine verbesserte Regelung des Hörerklanges, die Lautstärkeanhebung, die verbesserte Klingellautstärke und die optische Anrufsignalisierung eignet sich diese Telefon optimal für Menschen mit Hörproblemen. Durch das extra große Tastenfeld und das leicht lesbare Display mit großen Zeichen kann das Telefon auch von Menschen mit eingeschränkter Sehfähigkeit verwendet werden. Im integrierten Telefonbuch können bis zu 30 Namen mit Rufnummern gespeichert werden. Für häufig verwendete Nummern oder Notrufnummern können drei Direktwahl ...