SYNQ AUDIO RESEARCH DMC.2000 Operation Manual

EN FR NL DE ES WWW.SYNQ-AUDIO.COM V1.0 Copyright © 2011 by BEGLEC NV ‘t Hofveld 2C ~ B1702 Groot-Bijgaarden ~ Belgium Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited. Multifunctional Media contr ...

Dispose of the unit and used batteries in an environment friendly manner according to your country regulations. FR - DÉCLASSER L’APPAREIL Débarrassez-vous de l’appareil et des piles usagées de manière écologique Conformément aux dispositions légales de votre pays. NL - VERWIJDEREN VAN HET APPARAAT Verwijder het toestel ...

carefully so you will know how to operate this product properly. After you have finished reading the instructions, put them in a safe place for future reference. DON’T FORGET TO REGISTER YOUR ...

etc. will affect its performance and may even damage the unit.  Take care to minimize shocks and vibrations during transport.  When installed in a booth or flight case, pleas ...

FOLDER button.  Press the knob while you turn it to change the search key in the database, you can search the keys:  Art: search for “artist names” in alphabetical order (default search key)  Alb: sea ...

(manual or beat synchronized), different settings are possible:  Manual mode: the FX-SYNC button (38) is dark. You can set all parameters manually, use the following controls:  Jog-wheel (22): used to set the e ...

mainly used as DJ-microphone. The talkover does not affect the signal level of this input. 58. MIC1 VOL: Used to adjust the input level of micro 1. 59. MIC2 VOL: Used to adjust the input level of micro 2. 60. MIC T ...

 Connect a USB hard disk to the USB2-connection of the DMC1000.  Make sure that the USB-link on the DMC1000 is set to “LINK”.  Use the USB-cable, supplied with DMC1000, to connect the USB-link connection of the player to the USB2-connection (3) of the DMC200 ...

press the SHIFT-button (43) to turn the shift-function on: as long as the display shows “SHIFT” the MIDI-code of most buttons/knobs changes so they get a second (double) function. o Submenu 2 – MIDI message display: you can select if t ...

ENGLISH OPERATION MANUAL SYNQ® 15/120 DMC2000 DELETE CUE SW/LED 0C/0C C0 4B 0C/0C C0 4B 7FH：ON 00H：OFF LOAD TRACK SW/LED 0D/0D C#0 4C 0D/0D C#0 4C 7FH：ON 00H：OFF TIME X SW/LED 0E/0E D0 4D 0E/0E D0 4D 7FH：ON 00H：OFF ECHO SW/LED 0F/0F D#0 4E 0F/0F D#0 4E 7FH：ON 00H：OFF FLANGER SW/LED 10/10 E0 4F 10/10 E0 4F 7FH：ON 00H：OFF HOLD SW/LED 11/11 ...