Uniclass RD1041 Series Operation & User’s Manual

DVI USB KVM Switch Rev.1.1 Copyright© All rights reserved. ...

2 RD1041K/RD1041Q/RD1041QD Introduction................................................................................................................ 3 Overiew........................................................................................................................ 3 Features.................................................................... ...

this manual thoroughly and retain it for future reference. Overiew RD1041 (series) is a product of 4-port DVI USB KVM switch. User can easy access and control up to 4 computers with one keyboard and mouse. To monitor the computers, dual D ...

Console keyboard and mouse connector 2 x USB Type A female connector USB 2.0 hub 2 x USB Type A female connector Console video connector 2 x DVI-I female connector Console audio connector 1 x 3.5mm audio jack PC keyboard and mouse co ...

No. Item Description 1 USB2.0 port Connect to USB peripherals. 2 OSD menu button ■Press to enable the OSD menu. ■ Same function as Enter key under OSD menu. ■To c ...

8 7 6 RD1041QD 2 1 3 4 5 6 RD1041Q 1 2 3 4 ...

All illustrated accessories and monitors are not included in the package, it is for reference only. Connect to console ■ Plug the power cord to a power socket (the power cord/adapter may vary, it is depending on the models). ■ ...

■ Connect to a DVI monitor. 1 Connect to a computer's USB type A connector. 2 Connect to a computer's audio out jack。 Daisy chain ■ Connect to the RJ45 in connector of the first unit to the RJ45 out of second unit. First unit's out to second unit's in, and so on. Total can be connected up to 8 units of ...

■ Plug USB peripherals into the USB ports of front panel. Note that the USB ports of rear panel are not available for USB hub function. RS-232 control ■ Serial control is one of the features of RD1041. User can contorl RD1041 by sending commands from a PC as well. Please connect RS232 connector to a PC, a ...

To extend the function of KVM, connect to an extender and ethernet hub (both are not included) are required. Typically, the extender is usually comprised of two units, transmitter and receiver respectively. For more details of extension, please contact your local distributor. Front ...