Airlink101 APSMFP210 Quick Installation Manual

1 Port USB 2.0 Multi-Functional Printer Server Model # APSMFP210 ...

Section 1 Warning: Only a USB printer may be connected to the USB port of the Print Server. Connecting any other USB device to the Print Server may damage the Print Server. Note: Before installing the MFP Print Server, make sure you can print, scan, or fax with your multi-func- tional printer directly connected to your computer(s). Do not plug the power cord to the MFP Print Server until you have reached Step 4 of this secti ...

Before configuring the Print Server’s network settings, please take note of your computer’s TCP/IP setting. Step 1 Click on Start, Run, and type cmd and click OK. Step 2 At the command prompt, type ipconfig and press Enter. Step 3 Write down the information for the IP Address, Subnet Mask, and Default Gateway. You will need this information later. Step 4 Insert the Utility CD into your CD-ROM drive for the autorun ...

connected to your LAN, you will see multiple ones listed. Step 7 Refer to the information you wrote down at Step 3. If your computer’s IP address is not 192.168.1.x (where x is a number between 2-254), select Yes, I want to change settings, and enter admin (the default password) in the password field. Otherwise, select NO. Click Next. Step 5 Click Next ...

your local area network. For example: If your computer’s IP Address is 192.168.0.100, enter the same three numbers: 192.168.0 in the corresponding fields. Note: You can leave the last IP Address number 254 as is unless another network device (i.e. the Default Gateway) is already using that number. If another network device is already using 254, then ...

Step 10 Click Finish. ...

Step 1 Insert the provided CD and wait for the autorun screen to appear. Step 2 Select Install MFP PS Utility from the menu. Step 3 Click Next at the welcome screen. Note: If the autorun window does not appear automatically, go to Start, Run, and type D:\PS-Utility\Setup.exe (where D is the letter of your CD drive) and click OK. ...

Step 5 Click Next to accept the default program folder. Step 6 Click Finish. ...

Next. Step 8 Select Install the software automatically (recommended) and click Next. Step 9 Click Continue Anyway at the Windows Logo Screen. (For Windows 2000, click Yes at the Digital Signature Not Found prompt). ...

Step 11 (Optional) If the Found New Hardware Wizard pops up, follow the on-screen instructions to install your printer driver. ...

Section 4 Step 1 To run the MFP PS Utility, go to Start > (All) Programs > Airlink101 > Airlink 101 MFP PS Utility. Step 2 Click Unblock if the Windows Security Alert pops up. ...

clicking it, you will see a “-” sign) on the left side of the MFP print server. Step 4 Select your printer and click Connect. Step 5 Click the plus sign “+“ on the left side of the Connected devices, select your printer, right click it and click Add to favorites. ...

Step 7 Close the PS Utility window by clicking the “X” at the upper right corner on the window to keep this program running at the background. If you click Exit, the MFP PS Utility will be shut down. You have successfully configured the MFP Print Server for printing. Step 8 Go to Control Panel > (Printer and Other Hardware) > Printers and Faxes. Make sure the printer icon appears in the window. Note: If the printer’s driver has be ...

Web Site: www.airlink101.com Technical Support Section 5 *Printer server may not support all printers. Go to the Airlink101 website to view the printer compatibility list *Actual data throughput will vary. Network conditions and environmental factors lower actual data throughput rate. Specifica- tions are subject to change without notice. All products and trademarks are the property of their respecti ...