bem wireless MOJO II Operation & User’s Manual

new Speaker Mojo II, please thoroughly read and carefully follow all instructions in this User’s Manual or on the product. Keep this User’s Manual in a convenient location for future reference. Package Contents: Speaker Mojo II x 1 Power cradle x 1 Power adapter x 1 Micro USB charging cable x 1 Aux cable x 1 User’s Manual x 1 If any of the above contents were missing or damaged, please visit bemwirelesss.com/support/ to obtain a replacement. Please do not return to Club, please call 855-839-8616 if you have any questions or issues with the Speaker Mojo II. Compat ...

3. Volume – 4. Play / Pause /Speak- erphone 5. Power Cradle 6. On/ Off switch 7. Bluetooth© indicator 8. Aux in 9. Micro USB power port 10. Power indicator Power Cradle 11. USB port 12. Power Indicator 13. Charging switch 14. Micro USB power port Stereo Function 15. Stereo (L, M, R) Switch Speaker Mojo II Important: Select Speaker mode prIor to turnIng on Speaker(S) ...

Connect the standard USB end of the supplied USB cable to a USB power source (PC, USB power adapter…etc.). Connect the Micro USB jack to the USB charging port on the Speaker Mojo II. It will take about 2 hours to fully charge the Speaker Mojo II alone. Charging Indicator Light Modes Power indicator on Speaker Mojo II • Red LED: Speaker Mojo II is charging; • No LED: Battery is fully charged • Note: When the battery is low, you will hear a tone signaling you to charge the unit soon 2. Power Cradle Charge The Power cradle is a backup battery pack for Speaker Mojo II and your Bluetooth device. Connect t ...

• Red LED : Charging, it will go off when it is fully charged; • Blue LED : power output is on. 3. Wireless Conductive Charging via Power Cradle Connect the standard USB end of the supplied USB cable to a USB power source (PC, USB power adapter… etc.). Connect the Micro USB jack to the USB charging port on the power cradle. The charging indicator will light up while charging. If you put Speaker Mojo II onto the power cradle, it will charge them both at the same time whether you connect the power to the Speaker Mojo II or power cradle. It will take about 5 hours for charging them at the same time. Once both are fully ...

The included Power Cradle can also be used to charge other USB enabled devices. Simply follow the steps listed in number 2 to charge up the Power Cradle. You can now take the power cradle with you on the go to charge various other smart devices via USB. You can do so by connecting the standard USB end of a USB cable to the USB port in the back of the Power Cradle. Then plug the other end into your smart device. Slide the power switch to “on” to turn it on and begin charging other smart devices. The blue indicator light will light up to signify the unit is on.Slide the power switch to “off� ...

switch on the bottom of the speaker is switched to “M” before turning on the speaker Playing in Stereo Mode: One speaker must be switched to “L” on the bottom and the other must be switched to “R” before turning them on. Power on / Power off Slide the power switch to “on” to turn on the Speaker Mojo II. The Bluetooth indicator will light up blue to signify the unit is on and ready to be paired. Slide the power switch to “off” to turn off the unit and the Bluetooth indicator light will go out. Play Modes (Cont.) M L R M L R M L R M L R M L R M L R Important: Select Speaker mode prIor to tur ...

signal from the connected Bluetooth device. Before turning the Speaker Mojo II on, turn the speaker over so that the bottom of the speaker is facing up. Locate the stereo switch (L,M,R) on the speaker and make sure that it is set to the “M” or mono setting. • Now turn on the Speaker Mojo II. Once the Speaker Mojo II has entered Bluetooth mode, the Bluetooth icon will light up blue and the tone confirming that the unit is currently in Bluetooth pairing mode will sound. • Go to the Bluetooth settings on your smart device to find the device named “Mojo II”. A tone will sound to confirm the ...

• Please Note: If an Aux cable is connected to the speaker it will not play music from Bluetooth© connected devices. Stereo Speaker Mode (Two Speakers) • Bluetooth mode: The Speaker Mojo II has the ability to be connected together with another Speaker Mojo II to enter into stereo speaker mode. To enter into stereo speaker mode, begin by selecting either one of the Speaker Mojo II speakers and slide the stereo switch on the bottom of the speaker to “L” which stands for left. • Take the other speaker and slide the stereo switch to “R” which stands for right. Now turn on the speakers and they will auto pair to each o ...

disconnects due to being too far apart, the music playing on the “L-speaker” will pause. In stereo mode the speakers can be no more than 20 feet apart from each other.Once you are back in the above range of operation for the two speakers, they will reconnect by themselves automatically .When paired successfully again, there will be indication sound signaling a reconnection, and the two speakers will begin playing music within 3 seconds. • Direct Connection Mode (Aux In): Direct connection via Aux In is not supported in Stereo Speaker mode. Please refer to the “Direct Connection M ...

using a music player through your Bluetooth© connected device. Pressing the + and - buttons will increase or decrease the volume on the Speaker Mojo II. Please note that this will not affect the volume levels on the connected device. When the volume level on the speaker has reached capacity you will hear a tone. In stereo mode either speaker can be used to control volume level and play/pause. Connection Laptop / Notebook / PC As the Bluetooth© versions for these types of devices varies greatly, the connection methods will differ as well. If you can not connect with the Speaker Mojo II usi ...

Speaker Phone After pairing your mobile phone to Speaker Mojo II with Bluetooth, the speaker phone function can be used. • Making a call: Call will automatically transfer to the speakerphone. If not, tap play/pause button; • Answering a call: Tap play/pause button to answer the incoming call; • Ending a call : Tap play/pause button during the call to end the call; • Rejecting a call : Hold play/pause button to reject the incoming call; • Redial last number: Double tap play/pause button to redial the last number when it is not in a call. If you are using the speaker phone function in Stereo Speaker Mode, pleas ...

Solution: • Check if the Bluetooth indicator light is on. If the indicator light is off, please press the power button to turn the unit on. If the Bluetooth indicator light still doesn’t come on after pressing the power button, please charge the unit. • Check for other Bluetooth devices around the surroundings that may interfere with searching and turn devices off. • If pairing in single “Mono Mode” make sure the switch on the bottom of the speaker is sitting on “M”. • Power off and then power on the unit to restart the Bluetooth Unplug any cables plugged ...

Speaker Mojo II • Power off the unit and unplug the power adapter from wall outlet • Use a soft, dry, lint-free cloth and wipe gently • Do not use alcohol, benzene, thinners or other chemical detergents as these can cause the casing to be warped or discolored For questions, comments or to purchase more be¯m wireless products go to bemwireless.com “R” speaker by sliding the switch on the bottom of each speaker. • Be sure to make your mode selection (Mono or Stereo) while the speakers are powered off. Then turn them on. Issue: Interference or static during playback Sol ...

products go to: bemwireless.com You can also follow us at: facebook.com/bemwireless twitter.com/bemwirelessco youtube.com/bemwireless For information on your product’s warranty go to: bemwireless.com/support Storage • Power off the Speaker Mojo II If the unit will not be used for an extended period of time. • Do not set the unit in a damp environment, high temperatures or in direct sunlight. Important: Select Speaker mode prIor to turnIng on Speaker(S) ...

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority ...

Product Name : Speaker Mojo II Model Number : HL2750 Power Supply: 5V,1A Output Power: 1.5W X 2 USB charging output: 5V,1A x 2 Bluetooth V2.1+EDR , profile Supported: A2DP, AVRCP Working Range: Approximately 40ft, 12m Working atmosphere: 0˚C-40˚C / 20%-90%RH be¯m wireless http://bemwireless.com/ be¯m wireless LLC. 1725 Kilkenny Ct. Woodstock, IL. USA Made in China Important: Select Speaker mode prIor to turnIng on Speaker(S) ...

safety; in order to make sure the accident-free operation, please abide the guidelines listed below: • Always position the unit on a stable and level surface. Unstable surface can cause the unit to topple and fall, resulting in possible damage or injury • Do not drop, unpack, open, beat, curve, prink and burn the unit • Avoid using the unit nearby basins or sinks where it may come in contact with water • Do not place any ware with full water on the top of the unit, such as vase, glass, pot, and please avoid placing candle on the speaker surface as well ...

19 Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling WARNING: • The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, ...