AGI Security VC-SYS-HT1603 Quick Start Manual

QUICK START  1080P Video Recording Please read instructions thoroughly before operation and retain it for future reference. For the actual display & operation, please refer to your DVR in hand. Complete user manual download: www.surveillance-download.com/user/t204.swf ...

CAUTION: To reduce the risk of electric shock, do not expose this apparatus to rain or moisture. Only operate this apparatus from the type of power source indicated on the label. The company shall not be liable for any damages arising out of any improper use, even if we have been advised of the possibility o ...

NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD (“MPEG-4 VIDEO”) AND/OR (ii) DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS ...

1. CONNECTION AND SETUP ........................................................................................................... 1 1.1 SATA Hard Disk Installation....................................................................................................................................1 1.2 Camera Connection ..................... ...

A1.2 Configuration .....................................................................................................................................................32 APPENDIX 2 MOBILE SURVEILLAN ...

1 1. CONNECTION AND SETUP Before the DVR is powered on, make sure you have installed a hard disk, connected at least one camera and a HDMI monitor. For details, please refer to the following sections. Note: The DVR is designed to automatically detect the video system of the connected cameras (NTSC or PAL). To make sure the system detecti ...

2 Step3: Fasten the hard disk to the bracket by securing the screw on the bracket. CR2032 Hard Disk Step4: Replace the top cover and fasten the screws you loosened in Step1. 1.2 Camera Connection Install the camera on the wall or ceiling based on your installation environment and camera type. For installation details, please refer to the ...

3 STEP 3: Twist the RS485-A and RS485-B wires of the RJ11 cable and the speed dome camera together. Twist the RS485-A (red) and RS485-B (green) wires of the RJ11 cable to the RS485-A (brown) and RS485-B (orange) wires of the speed dome camera. To protect the naked wires, use the insulation tape to cover on the twisted wires. STEP 4: Conn ...

4 1.5 Date and Time Setting Before operating your DVR, please set the date and time on your DVR FIRST. Note: Please DO NOT change the date or time of your DVR after the recording function is activated. Otherwise, the recorded data will be disordered and you will not be able to find the recorded file to backup by time search. If users cha ...