Agilent Technologies 8453 Operator's Manual
Read Online
Read the Agilent Technologies 8453 Operator's Manual online using the built-in PDF viewer.
Key Pages of Document
Spectrophotometer Operator’s Manual all-guides.co m ...
Hewlett-Packard-Strasse 8 76337 Waldbronn Germany Copyright Agilent Technologies 2000 All rights reserved. Reproduction, adaption, or translation without prior written permission is prohibited, except as allowed under the copyright laws. Part No. 89090-90002 Edition 02/00 Printed in Germany Warranty The information contained in this document is subject to change without notice. Agilent Technologies makes no warrant ...
This handbook describes operation, installation, maintenance and repair, using GPIB commands, and service of the temperature control accessory. The handbook has four parts. Part 1 “Installing and Maintaining Your Temperature Controller” describes how you install, and maintain your temperature control unit, cell holder (option #100), external sensor (option #200) and GPIB commands PROM (option #305). Part 2 “Using Your Temperature Contr ...
1 Description An overview of the temperature control accessory, including specifications 17 Temperature Control Unit 19 Temperature-Controlled Cell Holder 20 External Sensor 21 GPIB Commands 22 2 Installing Your Controller How to install your control unit, cell holder, external sensor and GPIB commands PROM 23 Choosing a Suitable Place 24 Unpacking Your Controller 25 Unpacking the Con ...
33 Removing the Multicell Transport Cell Holder 33 Removing other Cell Holders 34 Viewing the Cell Holder 34 Installing the Temperature-Controlled Cell Holder 34 Connecting Cables 35 Connecting Flow Cell and Heat Exchanger 36 Setting Up Your External Sensor 38 Viewing the External Sensor 39 Connecting Cables 39 Installing Option #305 for GPIB Commands 40 Installing GPIB Commands PROM and GPIB Cab ...
4 Operating Your Control Unit How to prepare your control unit for operation 59 Before you Start 61 Turning on Line Power 62 Checking Operation 63 Turning off Line Power 64 Using Functions 65 Selecting Functions 65 Setting Functions 66 Resetting Functions 66 Setting Temperature 67 Example for Setting Temperature 67 Example for Correcting a Wrong Set Temperature 68 Changing Brightness 69 Changing Units 70 ...
A summary of the different control and read-out functions 79 Normal Mode 80 Edit Mode 80 6 Using External Sensor How to get more accurate temperature monitoring of your sample 81 7 Messages The messages that the control unit displays 85 Responding to Messages 87 OVERLOAD! 87 WARNING 1 87 WARNING 2 89 Display Messages 90 OUT OF RANGE 90 Status Messages 91 Status Lamps 92 Ready 92 Error 92 Stirrer 92 ...
8 Communicating GPIB Commands Controlling and communicating with the temperature control unit 95 Communication Interface 96 Remote Mode 97 GPIB Control 98 Service Request 99 Trigger Lines 99 Device Clear 99 9 GPIB Commands The GPIB commands for controlling the temperature control unit 101 Buffers 102 Instruction Format 103 General Description 103 Detailed Description 104 CSM – Agilent ...
116 SET – Set Cell Temperature 117 SEU – Select Unit 118 SPE – Speed 119 STA – Status 120 STR – Stirrer 122 TEM – Cell Temperature 123 TRA – Trigger Acknowledge 124 TRG – Trigger Out 125 TST – Test 126 ...
10 Electronics of the Temperature Control Accessory Block-diagram-level descriptions of the electronics 131 Electronics Overview 134 Power Supply 136 Line Fuses 136 Internal Fuses 136 Transformer, Regulation 136 Power Fail Detector 136 Power On Detector 137 GND, AGND, PGND, SGND, Shield 137 Microcontroller and Peripherals 139 PROM Card 139 Latch, Remote Control Connector 139 Lines to Power Amplifiers ...
148 Analog to Digital Converter (ADC) 148 11 Cables and Connectors Cables used with the temperature controller. 149 Cables 150 Connectors 153 12 Troubleshooting Troubleshooting instructions for trained personnel. 159 General Description 161 Diagnostic During Operation and Power-On 161 Starting Self-Test Manually 161 Ba ...
181 Changing Inner Cabinet Assembly 182 Changing Cell Holder Cable 183 Legal, Safety and Warranty Information Warranty Statement 188 All Chemical Analysis Products 188 Limitation of Warranty 188 Limitation of Remedies and Liability 189 Responsibilities of the Customer 189 Responsibilities of Agilent Technologies 190 Safety Information 191 General 191 Operation 191 Safety Symbols 192 Radio ...
Temperature Controller 1 Description 17 2 Installing Your Controller 23 3 Simple Maintenance 43 ...
Your Temperature Controller This part describes how you install, and maintain your temperature control unit, cell holder (option #100), external sensor (option #200) and GPIB commands PROM (option #305). The information for the cell holder, controller and external sensor is divided into the following chapters. ❏Chapter 1 “Description” ❏Chapter 2 “Installing Your Controller” ❏Chapter 3 “Simple Maintenance” all ...
temperature-controlled cell holder for the Agilent 8453 UV-visible spectrophotometer for sample temperature control. The digitally controlled unit uses thermoelectric heating and cooling (Peltier principle) over a 60 ° temperature range, 10 °C – 70 °C at 20 °C. The temperature control accessory gives a stable temperature for a wide range of applications, for example, en ...
Temperature Control Unit The control unit gives sample temperature control, sample stirring, and status and error indication. It controls the temperature of the cell holder and is operated manually through the keyboard interface or remotely through GPIB commands. Table 1 Control Unit Technical Specifications Power supply 100–120 VAC, 50–60 Hz 220–240 VAC, 50–60 Hz Temperature set range -10 °C–120 °C * Tem ...
Temperature-Controlled Cell Holder The cell holder is a temperature-controlled cell holder for 1 cm sample cells (cuvettes) and flow cells. Table 2 Cell Holder Technical Specifications Operating temperature range 10 °C–70 °C at 20 °C ambient temperature Accessible temperature range 10 °C below ambient temperature Temperature stability 50 °C above ambient temperature 10 °C–60 °C ±0.1 K >60 °C, � ...
