Denon PMA-50 Quick Start Manual

PMA-50 INTEGRATED AMPLIFIER Quick Start Guide Read Me First.... Guide de démarrage rapide / Guía de inicio rápido Please do not return this unit to the store – call for assistance. If you need help… : If you need additional help in solving problems, contact Denon customer servi ...

step-by-step instructions for setting up your amplifier. Welcome Before You Begin What’s In the Box Quick Start Guide Integrated Amplifier Owner’s Manual Power cord Safety Instructions Remote control unit Notes on radio Caps (silver) Warranty (for North America model only) USB cable ...

Speaker systems Speaker cables Optional Computer Bluetooth device These drawings are for illustrative purposes only and may not represent the actual product(s). ...

1 Before using the remote control unit 2 Placing this unit 3 Installing the driver software onto your PC (Windows OS only) 4 Connecting the speakers to the amplifier 5 Plug the power cord into a power outlet 6 Enjoying music using PC or Mac 7 Enjoying music using Bluetooth Setup ...

control unit n Horizontal placement The feet are initially attached to the unit for horizontal installation. 2 Placing this unit ...

Remove the feet. • Rotate each of the 4 feet counter-clockwise to remove. Insert the supplied caps (silver) into the holes from which the feet were removed. 1 2 Remove the cap (black). NOTE Be careful not to damage your nails when removing the caps. If necessary, use a thin-tipped tool to remove the caps. However, be careful not to d ...

(Windows OS only) Download the dedicated driver from the “Download” section of the PMA-50 page of the Denon website (http://www.denon.com/pages/home.aspx) onto your PC. Unzip the downloaded file. Select the 32 bit or 64 bit exe file that matches your Windows operating system, and double- click the file. 1 2 ...

and click “I accept the terms in the license agreement”. t Click “Next”. SOFTWARE LICENSING AGREEMENT r t y Click “Install” on the installation start dialog. • The installation starts. Do not perform any operation on the PC until the installation is completed. y ...

trust software from DandM Holdings Inc.”. i Click “Install”. u i o When the installation is completed, click “Finish”. o ...

w q w q (R) (L) Connecting the speaker cables q Peel off about 3/8 inch (10 mm) of sheathing from the tip of the speaker cable, then either twist the core wire tightly or apply solder to it. w Turn the speaker terminal counterclockwise ...