FeiYu Tech SUMMON Operation & User’s Manual

Publish in May 2016 GuiLin FeiYu Technology Incorporated Company 3-Axis Stabilized Handheld Camera ...

II How to use Summon 1. Function introduction of buttons and ports 2. Camera menu introduction 3. Introduction of photographing and shooting 4. Introduction of operating mode 5. LED indicator instructions 6. Reverse shooting 7. Firmware upgrade 8. Charging mode 9. Initialization 10. Operating examples III Product Parameters 1 2 2 3 6 6 7 7 7 8 8 8 10 EN CONTENTS ...

[3] Fill flash [4] 1/4 inch screw hole [5] USB port [6] Hand shank [16] Indicator light [15] Control connecting base [14] Panning axis [12] Cross arm [13] Erecting arm [11] Rolling axis [19] Camera/Record button [21] Micro SD port( Excluding card) [20] Microphone [23] HDMI interface [22] SD reading port [18] Function button [17] Joystick [10] Tilting axis [9] Camera back screen [8] Camera / Record switchover button [7] Camera [1] Camera ...

1. Function introduction of buttons and ports 1 Install battery Power on: Single click the function button on control panel for power on. Power off: Long press the function button for three seconds for power off and the indicator light turns off. If the battery power is low, the screen shall turn off automatically, please long press the function button for three seconds so as to make sure the unit completely powers off. The ...

Control the orientation of camera lens Control camera menu * Switch working mode or access camera menu. * Triple tap function button to access camera menu, the joystick can control camera menu at this moment. Please refer to “introduction of camera menu” and “introduction of working mode” Function button The video and picture files are named after the shooting time, for example, if the file name is “20160501_115201” ...

Only display in record mode Only display in camera mode 1080P (60fps) / 1080P (30fps) / 720P (120fps) / 720P (60fps) / VGA (240fps) / 4K (25fps) / 4K (15fps) / 2.7K (30fps) / 1440P (30fps) 16M (4508*3456) / 12M (4000*3000) / 8M (3264*2448) / 5M (2592*1944) Factory default setting is 1080P (60fps) Factory default setting is 16M ...

factory default setting is Off. Press Camera/Record button for continuous shooting after setting. Timelapse Open the timelapse function and set the internal time for shooting two adjacent photos. You can choose from 3 sec / 5 sec / 10 sec / 30 sec /1 min / Off. Factory default setting is Off. Timelapse Duration Set the shooting time of time-lapse photography. ...

orientation and initial mode Operation Double tap Single tap Function Explanation Panning Mode / Lock Mode Panning and Tilting Mode Triple tap Under panning and tilting mode, single tap to switch to lock mode Access camera menu Control camera menu by the joystick ( Please refer to “Joystick” ) Single tap to switch between panning mode and lock mode Quadruple tap Reset Operation instructions of function b ...

Single flash Double flashes Panning mode Panning and Tilting mode Lock mode / Initializing Always on Flash quickly Initialization failure / Malfunction Three flashes Standby 5. LED indicator instructions 6. Inversion shooting 7. Firmware upgrade Turn the hand shank to the upward side of camera to realize the inversion for shooting in the scenes with low angle. Upgrade steps (1) Please visit the official website ...

5V USB power adapter (Equipped by user ) Connect to USB port, and connect with 5V USB power adapter by USB cable (equipped by user). Or take out the battery, and use the corresponding charger to charge the battery (equipped by user). The red indicator light is on during charging, and green light is on after the battery is fully charged. 10. Operating examples Take time-lapse photography as an example: 9. Initialization Place Still In bo ...

shooting in advance, the pictures shall automatically generate videos after shooting and can be previewed in “Media Playback” （3）To select “Timelapse”, turn the joystick to the right to access this interface, you can set the interval time of continuous pictures taken by time-lapse photography. For example, you can set it as 5 seconds. Turn the joystick to the right to save, or ...