Digital Intelligence MultiDrive Adapter Operation & User’s Manual

Text of Digital Intelligence MultiDrive Adapter Operation & User’s Manual

U S E R G U I D E

Important! Important! Read Me Read Me First First Digital Intelligence MultiDrive Adapter all-guide s.com

No part of this manual, including the products and software described in it, may

be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of Digital Intelligence, Inc. (“DI”). DI PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, IN

Digital Intelligence, Inc. (“DI”) warrants to the original end-user that the product (excluding

accessories) will be free from defects in materials and/or workmanship for a period of one (1) year from the date of shipment. This limited warranty is non-transferable, and is issued only to you, the fi rst end user purchaser. Exclusions This warranty does not apply to: (i) DI software products; (ii) expendable components such as power cab

TABLE OF CONTENTS

Package Contents............................................................................. 2 What is the MultiDrive Adapter?....................................................... 2 Connecting a 2.5 inch hard drive........................................................ 3 Connecting a 1.8 inch hard drive with pin connector............................ 3 Connecting a 1.8 inch hard drive with ZIF connector............................ 3 Co

The following is included with the MultiDrive Adapter:

MultiDrive Adapter (1) • ZIF Drive housing (1) • ZIF to Pin adapter card (2) • Set of Toshiba mounting brackets (1 set labeled “T”) • Set of Hitachi mounting brackets (1 set labeled “H”) • Mounting screws (8) • User Guide (1) • What is the MultiDrive Adapter? The MultiDrive Adapter allows 2.5 inch, 1.8 inch pin connector and 1.8 inch ZIF connector IDE hard drives

Choose the appropriate set of brackets for the drive. Install the ZIF to pin

adapter card into the housing making sure the card is aligned with the housing and secure with the appropriate front bracket and screws. The 1.8 inch drive can now be connected to the ZIF adapter card. NOTE: Use care when making this connection because of the fragile nature of the connector. Finish installing the drive into the housing and secured using the back bracket and screw

MultiDrive Adapter Manual 4

Connecting a 2.5 inch hard drive: To use with a 2.5 inch hard drive, slide the drive into the top 44 pin connector un- til fi rmly seated, making sure not to damage or bend any of the pins. The adapter can then be connected to a write blocker or other standard IDE 40 pin connector. Connecting a 1.8 inch hard drive with pin connector: To use with a 1.8 inch hard drive with a pin connector, slide the drive into the bottom 50 pi

Connecting the MultiDrive adapter to a host:

The MultiDrive adapter connects to a write blocker or standard 40 pin IDE con- nector. Be sure to also connect the 4 pin molex power connector to provide power to the drive. Troubleshooting: Please try the following troubleshooting steps if experiencing diffi culties Check your connector to make sure you have a good connection and have 1. not damaged any pins when attaching the drive. Check to make sure you ha

MultiDrive Adapter Technical Specifi cations

Product MultiDrive Adapter Connectors Host side: 40 pin male IDP connector 4 pin molex power connector Drive side: 44 pin female IDP connector 50 pin male connector ZIF to 50 pin female adapter card LEDs YELLOW - Activity LED GREEN - Power LED Supported drive formats Standard 2.5 inch IDE hard drives Standard 1.8 inch IDE hard drives with 50 pin connector Toshiba 1.8 inch ZIF hard drives Hitachi 1.8 inch ZIF h

Digital Intelligence, Inc.

17165 W. Glendale Dr. New Berlin, WI 53151 P: 262.782.3332 F: 262.782.3331 ©2008 Digital Intelligence, Inc. All rights reserved.

Digital Intelligence Adapter Owners Instructions: