BDI Avion Assembly Instructions

assembly. Carefully follow this procedure to prevent any damage. Placement and Maintenance Avion® Home Theater Furniture is designed for indoor use on level floors. Clean glass with glass cleaner, and steel parts and wood veneer with a moist cloth. Step 1 Unpack and identify the components at left. Note that some components are shipped inside the cabinet. The assembly workspace should be a non-marring surface such as carpet. For missing hardware pieces, please contact BDI Customer Service at [email protected]. For all other concerns, please contact your BDI Retailer. Step 2 Build an ...

® 8928 assembly instructions bdiusa.com [email protected] Step 4 Install Handles (J) on the doors and drawers using the M4 x 25mm Screws (I) and the Phillips Screwdriver (A) supplied. Step 3 Carefully lay Assembled Cabinet (F) back- side down. Using one of 4mm Hex Drivers (B), attach the completed base assembly to the bottom of the Assembled Cabinet (F) with 1/4”-20 x 2” Machine Screws (E). *Note: Each of the metal legs has levelers that can be adjusted from inside the cabinet using one of the 4mm Hex Drivers (B). M K Adjustable shelf pins (pre-installed) may be repositioned, allowing you to raise or lower the adjustable she ...

® 8928 assembly instructions bdiusa.com [email protected] a. Remove rubber trim and glass panel. b. Replace insert panel Step 6 Optional fabric speaker or glass insert panel Avion’s drawer and door fronts feature removable/ replaceable panel inserts to permit customization of your cabinet’s appearance and utility. (Contact BDI Customer Service at [email protected]) Installing optional panel inserts is quick and easy: 1. From the inside of the door, and starting at one corner of the pre-installed Glass or Speaker panel insert, carefully pull away all four sections of the panel retention trim, running along the pe ...

® 8928 assembly instructions bdiusa.com [email protected] STEP 2 - Adjust Door Hinges (if needed) The doors on your cabinet should be evenly spaced and the doors should open and close freely without rubbing against the door frame. If the cabinet’s doors appear out of alignment, this condition can be corrected with minor adjustment to the European hinges on each door. Because these hinges are infinitely adjustable, adjusting one hinge element can sometimes cause the need for adjustments to other elements. But with a few adjustments, you can modify the orientation of the cabinet doors to make sure that they hang perfectly within ...