Canon EOS-1DX Instruction Manual
Read Online
Read the Canon EOS-1DX Instruction Manual online using the built-in PDF viewer.
Key Pages of Document
Wired LAN Functions Transfer images to an FTP server Use a web browser to capture, view, and download images remotely Use EOS Utility to capture, view, and download images remotely View images on a DLNA- compatible TV or other devices FTP Transfer EOS Utility WFT Server Media Server EOS Utility ...
Slave camera Master camera Slave camera Master camera LAN cable LAN cable Hub ...
settings are complete. For details on configuring these settings, refer to the documentation provided with the respective equipment. Terms in brackets [ ] indicate button or icon names or other software elements. Brackets also denote camera menu items. Page numbers in parentheses indicate where you can find additional information. These instructions assume that you have read t ...
9 Transferring Images to an FTP Server 21 Remote Capture Using EOS Utility 43 Remote Capture Using WFT Server 49 Using the Camera as a Media Server 65 Managing Settings Information 69 Synchronizing the Camera Time 79 Troubleshooting 83 Reference 99 1 2 3 4 5 6 7 8 9 ...
Chapter List ...................................................................................................... 5 Contents ........................................................................................................... 6 Basic Network Settings 9 LAN Cable Connection.............................................. ...
69 Checking Settings ........................................................................................... 70 Changing Settings........................................................................................... 72 Saving and Loading Settings .......................................................................... 76 Synchronizing the Camera Time 79 Synchronizing the Time.................... ...
Complete the basic network settings by following connection instructions on the camera menu screen. ...
Open the Ethernet RJ-45 terminal cover and connect the LAN cable. Use a highly shielded Category 5e or higher STP (Shielded Twisted Pair) Gigabit Ethernet cable. LAN Cable Connection LAN Cable ...
LAN connection. Set up the EOS-1D X and computer in advance so that you can connect the camera to the computer via wired LAN. Set up a DLNA*-compatible television, digital photo frame, or similar media player so that it is ready for use after the EOS-1D X is connected. * DLNA: Digital Living Network Alliance Getting Ready [FTP trans.], [EOSUtility], [WFTserver] [MediaServ.] ...
instructions. If an error is displayed, see “Troubleshooting” in Chapter 8 (p.83) and check the settings. Pressing the shutter button or other camera controls during configuration will cause the connection instructions to close. Do not press the shutter button or other controls until configuration is finished. On the [52] tab, set [Auto power off] to [Disable]. If auto power off ...
5 Select [Connection wizard].
The [Select communication
method] screen is displayed.
The
communication method, and then press <0>. Select [OK] and press <0> to go to the next screen. • FTP trans. Select this option to transfer captured images to an FTP server. Images can be automatically transferred as you shoot them, or you can select images to be transferred later. Computer Operating Systems Use of [FTP trans.] requires that one of the following operating systems be installed on your computer. In ...
• EOSUtility Select this option for remote capture over a wired LAN using the EOS Utility (EOS software). In addition to remote capture, almost all EOS Utility camera operations except firmware updating are supported, because this option utilizes a wired network instead of a USB cable. Requires a computer with EOS Utility (EOS software) installed. • WFTserver Select this option for remote capture over ...
Make sure [Wired] is selected, and then press <0>. Select [OK] and press <0> to go to the next screen. Selecting the LAN Type ...
configuration method for the network settings, and then press <0>. Select [OK] and press <0> to go to the next screen. [Auto setting] Settings otherwise configured with [Manual setting] can be configured automatically. However, in environments using DHCP servers or routers supporting DHCP server functions, the IP address and similar settings must be assigned and configured automatically. If an error is displayed ...
The following instructions are for setting screens that vary depending on the communication method (FTP Transfer, EOS Utility, WFT Server, or Media Server), as shown below. Read the page that describes the selected communication method. FTP trans. Chapter 2 (p.21) EOSUtility Chapter 3 (p.43) Completing Settings for the Communication Method Users of EOS Utility Ver. 2.13 or Earlier in Windows Before performing the operations ...
The virtual keyboard is displayed when entering the server name and
other information.
Switching between input areas
To switch between input areas, press the
button.
Moving the cursor
To move the cursor, turn the <5> dial.
You can also move the cursor using
<9>.
Entering text
In the bottom input area, turn the <5>
dial to move the cursor and press <0>
to enter text.
You can also move the cursor using
<9>.
You can check h ...
