D-Link Rangebooster N 650 Access Point DAP-1353 Quick Install Manual

Package Contents System Requirements If any of the above items are missing, please contact your reseller. • Computers with Windows®, Macintosh®, or Linux-based operating systems and an installed Ethernet Adapter • Internet Explorer version 6.0 or Netscape Navigator 7.0 or higher (for configuration) • D-Link DAP-1 ...

Connecting the DAP-1353 to your network C. Antennas Used to broadcast wireless network and recieve connections from 802.11 b/g/draft n wireless clients. B. LAN Port Connects DAP-1353 to a switch or PC. A. Connect the power adapter to the receptor on the rear panel of the DAP-1353 and then plug the other end of the power ...

Using the Wireless Security Setup Wizard Open your web browser and type http://192.168.0.50 into the URL address box. Press Enter. Type admin for the username and leave the password blank. The login screen will appear: Once you have logged in, the Setup screen will appear: Click Launch Setup Wizard ...

Click Next The Wizard welcome screen will appear: Create and verify a new admin password: Click Next In Step 2 of the Wizard, enter an SSID (Service Set Identifier). Auto Channel Scan is enabled by default. Uncheck it to select a channel. The SSID is the name of your wireless network. The SSID is case- sensitive and can ...

Select the level of security for your wireless network: Click Next • Best - WPA2 Authentication • Better - WPA Authentication • Good - WEP Encryption • None - No Security At the Set Your Wireless Password screen, if you selected Good (WEP) security, the following screen will appear. Select the key type, Hex (A-F, ...

At the Setup Complete screen, if you selected Good security, the following screen will show your WEP key. This key should be used by wireless clients connecting to the wireless network: Click Save At the Set Your Wireless Password screen, if you selected Better or Best (WPA or WPA2) security, the following screen will a ...

If you selected Best security, the following screen will show your Pre-Shared Key. This key should be used by wireless clients connecting to the wireless network: Click Save If you selected Better security, the following screen will show your Pre-Shared Key. This key should be used by wireless clients connecting to the w ...

After completing the steps in this Quick Install Guide, your DAP-1353 should be integrated into your network: Your Setup is Complete! ...

D-Link website. Tech Support for customers within Australia: D-Link Technical Support over the Telephone: 1300-766-868 Monday to Friday 8:00am to 8:00pm EST Saturday 9:00am to 1:00pm EST D-Link Technical Support over the Internet: http://www.dlink.com.au email:[email protected] ...