Body Clock Profile TENS User Manual Manual

108 George Lane, South Woodford, London E18 1AD Tel: 020 8532 9595 Fax: 020 8532 9551 UK: www.bodyclock.co.uk e-mail:[email protected] USA: www.bodyclock.net e-mail:[email protected] Profile TENS i n s t r u c t i o n s f o r u s e For USA only: Federal law restricts this device to sale use by or on the o ...

Equipment type: Dual channel digital TENS Output voltage: 0 - 50v peak to peak adjustable in levels 0 - 20 (through a 500 Ohm load) Output Intensity: 0 -100 mA peak to peak adjustable in level 0 - 20 (measured across a 500 Ohm load) Level 0 is Ov and has no output Frequency: 50 selectable frequencies - adjustable up or down 1- 2 ...

pulse width upwards or downwards as desired between 25 - 250 microseconds. 8. Mode selector button. 9. Timer. This unit has 7 selectable settings (i) continuous When the unit is first used (or after removal of batteries unless you have activated the locking facility) it will be automatic ...

1 and 2. Two way buttons to increase and decrease intensity for channels 1 and 2. Pressing the UP arrow increases intensity. Pressing the DOWN arrow decreases intensity. The selected level of intensity is indicated on the LCD screen by means of black bars on the left of the screen for Channel 1 and on the right for Channel 2. 3. This butt ...

4.Jackplug/ Leadwire sockets 3. On/Off control 5. Frequency control 2. Intensity control for channel 2 1. Intensity control for channel 1 10. LCD display 7.Pulse width control 9.Timer 8.Mode Profile TENS diagram INSTRUCTIONS FOR USE The Profile TENS is a dual channel TENS, supplied with leadwires, elec- trodes, battery and carrying po ...

from oil, talc, etc. 5. Position electrodes in accordance with the guidelines illustrated in “An easy guide to TENS Pain Relief” or preferably with your medical adviser. NB It is a safety feature of the Profile TENS that the intensity controls will only work if the leadwires are connected with electrodes attached ...