Coban VT105 Operation & User’s Manual
Read Online
Read the Coban VT105 Operation & User’s Manual online using the built-in PDF viewer.
VT105 Operation & User’s Manual: Key Pages of Document
VT105 User Manual Preface Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual. Any change will be integrated in the latest release. The manufacturer assumes no responsibility for any errors or omissions in this document. ...
2. Applications ...................................................................................................................................................................... 4 3. Hardware Description........................................................................................................................................................ 4 4. Accessories............................................................................................... ...
7.26.2. Arm / lock door by remote controller ..............................................................................................................16 7.27. Disarm......................................................................................................................................................................16 7.27.1. Disarm / unlock door by SMS ......................................................................................................................... ...
1.1. This tracker is a new product based on the GSM / GPRS network and GPS satellite positioning system, which set multiple functions of security, positioning, monitoring surveillance, emergency alarms and tracking in its entirety. It can track and monitor remote target by SMS or internet. 1.2. Features GPS/LBS (location based service) double way tracking solution. SMS/GPRS/Internet Network data transmission. Configure by remote terminal, remote control vehicle. Snapshoot photo automatically when alarm triggered RFID. Fuel level measurement, Oil leakage or theft alarm. Vehicle Speed Detection. Ki ...
9 Camera Choose one only from these 2 accessories for each tracker 10 RFID ...
Option 12 Fuel sensor Option 5. Specifications Content specifications DIM. 92*71*26mm Weight 120g Network GSM/GPRS Band 850/900/1800/1900Mhz GPS Sensitivity -159dBm GPS Accuracy 5m GPS Start time Cold status 45s Warm status 35s Hot status 1s Voltage of car power system 12 V -24V Backup battery Chargeable 3.7V500mAh Polymer Li-Battery Storage Temp. -40°C to +85°C Operation Temp. -20°C to +65°C Humidity 5%--95% non-condensing 6. Installation 6.1. Terminal Installation 6.1.1 Please ask the qualified engineers to install. 6.1.2 Do not install it in an environment which is over GSM &GPS performance and fix the antennas in a positio ...
6.1.7 Connect the GPS and GSM antenna to the right connector, and find an appropriate place to fix the antennas to make sure good reception. 6.1.8 Find the accompanied harness and insert it into the corresponding holes of the products, and connect the wires with the original car circuit showing below. 6.1.9 Fuel sensor diagram instructions: Refer to the fuel sensor installation instructions. 6.2. Installation wiring diagram 6.2.1. Unit installation wiring diagram 6.2.1.1.choose only one from vehicle Speed detection and fuel measurement. 6.2.1.2.For vehicle Speed detection, white with black wire ...
6.3. SIM Card Installation 6.3.1 Use a tweezers or a sharp thing to touch the SIM CARD popup switch, the SIM CARD slot will pop up, take out the SIM card slot to load the SIM card, and then put the SIM card slot back to its original position after confirm the SIM card in the right place. 6.3.2 Please make sure that the SIM card is GSM network and able to execute the function of incoming calls display, no calls can be diverted and the PIN code is locked. The SMS format must be TXT format, and can’t recognize the PDU format. 6.3.3 If need to save historical positions or positions when GSM not available, ple ...
LED color Behavior Descriptions Red on No GSM signal Red one time per second (fast) GSM signal normal and work under GSM mode Red one time per 3 seconds (slow) GPRS mode Green Quick flash GPS signal normal Green OFF No GPS signal Red & Green Flash three times alternately Detect microSD card 7.3. Initialization Send SMS “begin+password” to the unit, it will reply “begin OK” and initialize all the settings to default factory settings.(default password: 123456) For example: Send SMS “begin123456”, it will reply “begin ok”. (No quotation marks “”when sending all the SMS) 7.4. Change Password 7.4.1. Send SM ...
cell phone number. You should authorize your number in international format as follows: “admin123456 008613322221111” to tracker to set 13322221111 as an authorized number. 7.6. Dual SIM Card 7.6.1. Device supports dual SIM card, but only one of them work with tracker, and switch to the other one automatically when it is broken or no GSM reception. 7.6.2. Device default external SIM card as card ONE which have the priority to work with the tracker,. when 2 cards are valid, can be set by text message to specify priority to one of the ...
7.9.1 Track with limited times upon time interval: Send SMS command “fix030s005n +password” to the tracker device, it will report the latitude & longitude at 30s intervals of 5 times. (s:second, m:minute, h:hour). This command set must be in 3 digits and the maximum value is 255. 7.9.2 Track with unlimited times upon time interval: Send SMS “fix030s***n+password” to the tracker device, it will reply the latitude & longitude continuously at interval of 30 seconds. Note: the interval must not less than 20s. 7.9.3. Smart track upon time and distance interval: Please set "track with unlimited times upon time interval" b ...
street address. For example: No.8, Guankou 2nd Rd, Nantou, Nanshan district, Shenzhen, Guangdong, china. 7.13. Location based service (LBS) / Cell-ID Locating. If the tracker cannot establish a solid GPS Fix, it will calculate its location using Cell-ID GSM locating, Location reports will include the GPS coordinates of the last known positions as well as a LAC code, Entering the LAC code to the “Manual Track” menu of web tracking platform will enable you to see the tracker’s current location. You can also send command “address+password” to the ...
7.15.4.1 Send command “ governor+password” to tracker, it will reply “ governor ok” and switch to governor mode. 7.15.4.2 Set governor: send command “max+password 080”. E.g max123456 080, 123456 is the password, 080 is the speed. 7.15.4.3 When speed approach max speed, siren beeps 5 times to warn the driver; when speed reaches or exceed the max speed, relay will be activated to limit the speed. 7.15.4.4 Cut off oil and power system doesn’t work in governor mode. 7.15.4.5 Cancel: send command “nogovernor+password” to tracker, it will reply “nogovernor ok”. 7.16. Vehicle maintenance notification Send SMS "servi ...
Send SMS: “load+ password” to tracker device, it will reply: “load ok” if the device is working well under GPRS mode; if not, it will reply “load fail! Please check gprs” that means device does not work under GPRS mode, and the data can be only uploaded to web platform by gprs. 7.19.2 Specified date Load: Send SMS: “load+ password+ space+ year month date” to tracker device, it will reply: “load ok” and load the tracking data to the monitoring platform upon the valid time you choose. For Example: send SMS: “load123456 20110425” to the tracker device, means to load the tracking data of 25 ...
Button Function Descriptions ARM / Lock Press for 0.5 second, the siren will beep 1 time. DISARM /unlock Press for 0.5 second, the siren will beep 2 times. ARM & Silent mode Press for 0.5 second when it is in disarm state, the siren will beep 1 time. No voice from siren when alarm triggered and quit from siren mode automatically when disarm. SOS Press for 3 seconds, Tracker will send SOS alert to authorized phone numbers without voice. Deterrence/car search Press for 0.5 second when it is in arm state, siren will beep 10 seconds, press disarm button to quit. 7.24. Remote controller programming 7.24.1 Supply ...
In disarm mode, short-press remote control button ,the door of the vehicle will lock, and tracker changes to arm states, siren beep 1 time, no SMS message. If the vehicles are in ignition state (ACC is ON), fail to change to arm state, but door will be locked, siren will not beep. If car door is not closed, siren will beep for 3 times. 7.27. Disarm 7.27.1. Disarm / unlock door by SMS Send SMS command "disarm+password" to the tracker device in the vehicle, It will reply “Tracker is deactivated” in both armed and disarmed state, and the SMS command will make the tracker device enter into disarmed state if ...
7.29.1.1 SOS via remote controller Press button for 3 seconds; siren will not beep, the tracker device will send SMS “help me+lat./long.” to all the authorized numbers at interval of 3 minutes. It will stop sending such a SMS when any authorized number reply SMS “help me!” to the tracker. 7.29.1.2 SOS via SOS Button Long-press SOS button on the cables for 2 seconds, the device will send sms: “help me + lat/long” to every authorized number at interval of 3 minutes. No beeps from siren. Alerts will be stopped after received “help me!” from any authorized phone number. 7.29.2. Geo-fence Set up a geo ...
Send SMS command:"noarea+password+space+area name", tracker will reply:"noarea ok". 7.29.3.3 Rename and set distance Send SMS command "rename+password+space+old name;new name,distanceM" to tracker, if name is not repeated and area doesn't cover others, it will reply "rename ok!" for successful configuration. Example: Send"rename123456 area01;school,800M", it means the new area name is "school", and covers area of a radius of 800 meters. 7.29.3.4 Activate multi-area management Send SMS command "area+password+space+on" to tracker, it will reply "Area on ok!", when tracker enter the pre set area, it will send SMS "area name+latitude ...
when car stop, It will send oil leak or theft alert “oil: XX%+ Lat, Long” to authorized number in 3 minutes interval. Siren beeps 30 seconds continuously. 7.29.6.3.Cancel fuel alarm: Send SMS command “nooil+password” to tracker. 7.29.7. Low battery alarm 7.29.7.1.Send SMS “lowbattery+password+space+on”, it will send SMS “low battery+latitude/longitude” to authorized numbers 2 times in total at 15 minutes interval when voltage of battery is going to be about 3.55V. 7.29.7.2 This function activates as default, send SMS “lowba ...
The tracker will send SMS “ACC alarm+lat/long” to the authorized numbers in 3 minutes interval when the engine of the car is turned on, that is the key is rotated to ACC.ON position to start the car in arm state; send disarm command “disarm+password” to stop it. 7.30.3. Shock Sensor Alarm (Option) The tracker will send SMS “Sensor alarm+lat/long” to the authorized numbers in 3 minutes interval when the sensor is triggered in arm status; the siren beeps 5 seconds if shock sensor alarm is triggered one time in 15 seconds and beeps 30 seconds if it is triggered two times in 15 seconds, send disarm command “disarm+password� ...
GPS PDF Instructions
- 1 - TABLE OF CONTENTS Important Notice GPS-95CP(i) Color LCD Charting System Welcome ……………………………………………………… 11 Introduction ……………………………………………………… 12 Display Unite …………
Owner’s Manual ZUMO ™ 500/550 the personal motorcycle navigator
Vejledning til lynstart Серии nüvi ® 200W доступная навигация Краткое руководство по эксплуатации