Anthro Elevate II Adjusta Assembly Instructions Manual
Text of Anthro Elevate II Adjusta Assembly Instructions Manual
10450 SW Manhasset Dr. | Tualatin, OR 97062
Toll-free: 800.325.3841 | Fax: 800.325.0045 | email: [email protected] | anthro.com
Outside the U.S. | Tel: 503.691.2556 | Fax: 503.691.2409
Rev G, February 2016
NOTE: The CPU SideRack - Inboard is not included.
Part #
Product
MVJB48zz-xx
ELT 2 Adjusta 48w
MVJB60zz-xx
ELT 2 Adjusta 60w
Certification: Elevate II Adjusta is certified by ETL to UL962 standard for Commercial and Household furnishings.
ASSE
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical furnishing, basic precautions should always be followed, including the following.
Read all instructions before using Elevate II Adjusta.
DANGER
To reduce the risk of electric shock, always unplug this furnishing from the electrical outlet
before cleaning.
WARNING
To reduce the risk of burns, fire, electric shock, or injury to persons:
1. Unplug from outlet before putting on or taking of parts.
2. Clo
Before beginning assembly of your Elevate II Adjusta,
please review the parts list to verify that your
shipment is complete.
3
Product
Quantity
Part Number
01 Monitor Surface
1
48w
101-1112-03-00
60w
101-1110-03-00
02 Keyboard Surface
1
48w
101-1113-03-00
60w
101-1111-03-00
03 Gusset X
1
225-4611-00
04 Gusset Y
1
225-4612-00
05 Electric Leg
2
575-5085-00
06 Motor Housing
2
225-4613-00
07 Cross Pan
1
48w
225-4619-00
60w
225-4615-00
08 Cab
Questions? Call us at 800.325.3841 or visit anthro.com. We’re happy to walk you through the assembly!
STEP 1 - ATTACH GUSSETS TO TOP
Lay the top surface upside down on a cushioned, non-marring surface. Locate
the front edge of the table. On Plus tables, the front of the table has a sloping
waterfall edge. On the Basic tables, the back edge of the table has the seam
where the edgebanding meets.
Align the Leg Gussets with the holes on the
Elevate II Adjusta Assembly Instructions
5
STEP 3 - INSTALL THE CROSS PAN
Align the Cross Pan with the Leg Assemblies so the pair of flanges
on the pan line up with the pre-drilled holes on the table. Attach
the back of the pan to the top with four 3/4" MDF Screws
(325-5575-00) and attach the front of the pan to the top with
three 3/4" MDF Screws.
Attach the pan to each leg housing with two M6x14 Button-head Screw
(325-5503-00) using the Anthr
STEP 6A - ASSEMBLE ADJUSTA MECHANISM
Your Adjusta mechanism comes unassembled and
is boxed separately inside the package. Locate the
small bag of hardware included with the Adjusta
Mechanism. It includes (1) Post, (1) Cotter Pin, (2) Hex
Nuts, (2) Wood Screws, and (2) Cable Mounts.
Begin to assemble the mechanism by first locating the Crossbar and Brake/
Paddle assembly and position them as shown at right. Depress the Paddle once
to free the
Elevate II Adjusta Assembly Instructions 7
M6-20 Cap Screw
325-5272-00
STEP 9 - INSTALL FEET
Align one foot with each leg so the wheels are at the back. Attach the foot to
the leg with four M6x20 Socket-head Screws using the Anthro driver. Repeat
for the other foot.
With the help of another person, carefully rotate the table onto its feet.
STEP 8 - ATTACH ADJUSTA MECHANISM TO KEYBOARD SURFACE
Slide the Keyboard Surface under the mechani
For warranty information, please visit: www.anthro.com/support/warranty
Notices:
Anthro logo is a registered trademark of Ergotron, Inc. © 1994 - 2016; Anthro-DNA is a
trademark of Ergotron Inc., © 2016. All rights reserved.
Anthro is also a brand of Ergotron Inc., a Nortek company.
Anthro reserves the right to modify the design and specifications without prior notice.
TROUBLESHOOTING GUIDE
Is the table giving you trouble? Try these steps fi