Bush DVB-T2 PVR Operation & User’s Manual

These instructions contain important information which will help you get the best from your television and ensure safe and correct installation and operation. For any help concerning set up and use of your TV please call the Customer Helpline : 0345 604 0105 Lines open: 9am - 8pm Monday to Saturday and 10am - 4pm Sunday For any help concerning set up and use for your T ...

Contents Safety Precautions ................................................. 3 Power Cord ......................................................... 3 Overview of the Remote Control ............................ 5 Connections on the Set Top Box ............................ 6 Inserting Batteries in the Remote Control............... 7 Connecting the Set Top Box to a TV Set ................ 7 Antenna Connection ........................................... ...

Features • 200 channels • Programme recording • 8-Days EPG. • TV scart (with RGB and CVBS support). • Favourite list. • Parental lock options. • Manual and automatic search options. • On-Screen-Display. • Automatic day light saving time updating. • Decoding & Video Out: PAL. • Multi-format audio decoder. • Multi language audio support (up to 10). • Audio mute and volume control. • Record programmes using 8 day EPG • DVB- ...

Safety Precautions Power Source Power • Always use the provided AC adaptor. • Operate only from the power source specified on the AC adaptor. • The power adaptor may become hot during normal operation. This is not a malfunction. • Please make sure that the adaptor is not covered while in operation. Leave a space of 15 cm (minimum) around the AC adaptor. • The rating information and safety caution of the AC adaptor are provided on the ad ...

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and to ensure its safety. DO read the operating instructions before you attempt to use the equipment. DO ensure that all electrical connections (including the mains plug, extension leads and inter-connections between the pieces of equipment) are properly made and in accor ...

Connections on the Set Top Box 1. USB INPUT: To connect external USB storage devices. 2. OPTICAL AUDIO OUT: You can use this connector to output the digital audio to an external device. See your audio system instruction book for further information. 3. ANTENNA IN: Aerial input 4. ANTENNA OUT: To watch channels on the TV 5. HDMI IN: HDMI connection 6. LAN: Ethernet Input 7. SCART OUT: If your TV has a scart connector, you can connect the box to your T ...

Inserting Batteries in the Remote Control • Remove the battery cover located on the back of the remote control by gently pulling backwards from the indicated part. • Insert two AAA/R3 (2 X 1.5Volt) or equivalent type batteries inside. Place the batteries in the correct direction observing the polarity symbols (+/-) and replace the battery cover. • While using the remote control, you should direct it towards the front panel of the receiver. Remo ...

Power Connection MPORTANT: The set-top box is designed to operate on 12 V DC. For this, an adaptor is used which gives 12 V voltage. Connect this adaptor to a system that supplies 220-240V AC,50Hz. • After unpacking, allow the set-top box to reach the ambient room temperature before you connect the set to the mains. Antenna Connection This illustration shows how to connect an antenna. • Use ANTENNA IN to connect to an antenna system. ...

Power On-Off Connect all cables before plugging into the mains. After plugging in the AC adaptor for the set top box to the mains supply, red light will be seen on the front panel (Standby mode). When the set top box is first powered up please wait until the box is initialized before activating the receiver since booting of software will take some time. Please wait until unit is initialized. This may take almost a minute. This product conforms with t ...

Important - Hard Disk Information This Recorder has a built in hard disk (abbreviated as HDD ) for recording and playback. Beware of the following points when setting up and using the Recorder. Failure to observe precautions may cause damage to the HDD itself or its content, failure of the disk to operate, or recording of noise. • Do not subject the Recorder to any vibration or impact. • Do not place the Recorder in a cramped location which migh ...

First Time Installation IMPORTANT: Ensure that the aerial is connected before switching on the set top box for the first time. When the set top box is operated for the first time, installation wizard will guide you through the process. First, TV Type selection on-screen menu will be displayed: By pressing the “ ”/“ ” buttons select the Tv type you want to set and press OK button. Afterwards, “Select HDMI resolution” OSD will appear on th ...

• To cancel mute, you can press button again or use the V +/- buttons. On-Screen Information • You can press the INFO button to display on-screen information. Details of the station and current programme will be displayed on the information screen. • The information screen will then display the current event name, next event name, starting and ending time, duration bar, programme mode and the channel number and name. Instant Recording • Pre ...

• Press MENU button to view main menu. Select Channel List item by using “ ”/“ button. Press OK to view menu contents. Note: You can direclty press OK button to view channel list. Operating the Channel List • Press “ ”/“ ” button to select the channel that will be processed. • Press “ ”/“ ” button to select a function on Channel List menu. • Use P+/P- buttons to move page up or down. • Press BLUE button to view filte ...

• Mark the other channels you want to lock the same way and press OK. • Enter the pin code in the menu displayed and press OK. • The selected channels will be locked. • To mark all the channels in the channel list at once you can use GREEN key. Setting Favourites • Select Favourites by using “ ”/“ ” buttons and press OK button. • You can set various channels as favourites so that only the favourite channels are navigated. • S ...

Record Programme Highlight it and press OK button to set the programme to recording. Record Series/Delete Series In the EPG menu, after you have selected a programme, press the OK button and select the Record Series option and press the OK button again. The selected programme will then be set for series recording. With this feature, you can record a programme and all of its following parts within 8 days. The information belonging to the selected pro ...

Recordings Library To view the list of recordings, press the MENU button to display the main menu and use “ ”/“ ” buttons to highlight the “Recordings Library” and press the OK button. Recordings Library will then be displayed with available recordings which are kept in a list Red bar: Indicates the used space of the recordings on the hard disk. Green bar: Displays the approximate capacity required for the timers currently set. RED butto ...

Text After you have selected the Include option in the “Main Title” menu, you can edit the main title. Duration Set the duration of the appearance of the main title on the screen. Recording Title If you want to display a recording title, select Include. If not, select Skip. Display You can add name,start date/time or length information to your archived file by using display option. Duration Set the duration of the appearance of the Edit recordin ...

Pause: Pauses slideshow Play ( button): Resumes the slideshow. Stop ( button): Back to the file list. Rotate ( buttons): Rotate the picture using up/ down buttons. Previous/Next ( / buttons): Jumps to previous or next file. Info: Shows/hides the info bar. RED: Activates Shuffle mode. GREEN: Activates Loop mode. Settings • Select Settings from the main menu by using“ ”/“ ” buttons and press OK button to display. Recordings To configure ...

Max Time Shift Select the maximum time allowed for timeshifting. See Time Shifting section for more information on timeshifting Auto Discard Discard: When the HDD is full and a timer is set to record, the unit will automatically discard previous recordings based on this setting. The options are as follows: None: The unit will not discard any recordings and the timer will not record the requested programme. Oldest: Starting with the oldest, recordin ...