Datalogic Falcon X3 Operation & User’s Manual

Via S. Vitalino 13 40012 - Lippo di Calderara di Reno Bologna - Italy Falcon™ X3 with Windows Mobile 6.5 - User's Manual Software Version: 1.00 Ed.: 11/2011 ©2010-2011 Datalogic Mobile S.r.l. - ALL RIGHTS RESERVED - Protected to the fullest extent under U.S. and international laws. • Copying, or altering of this document is prohibited without express written consent from Datalogic [name of the owner of the copyright]. Datalogi ...

Services and Support...........................................................................v GENERAL VIEW................................................. ...

4.7.5 Summit Client Utility.......................................................................... 52 4.8 Windows Connections....................................................................... 55 4.8.1 Windows Mobile® Device Center...................................................... 55 4.8.2 Bluetooth® Manager Device Setup................... ...

“User” refers to anyone using a Falcon X3 mobile computer. “Mobile computer” and "Falcon X3" refer to the Falcon X3 mobile computer. “You” refers to the System Administrator or Technical Support person using this manual to install, configure, operate, maintain or troubleshoot an Falcon X3 mobile computer. “Single Dock” refers to the Falcon X3 Single Slot Dock. REFERENCE DOCU ...

C) LEDs D) Microphone E) Front Scan Key F) Keyboard G) Stylus H) Laser Safety Label I) Loudspeaker J) Color Camera and Flash K) Product Label L) Reset Key (under battery) M) Micro-SD Card Slot (under battery) *Remove protective film cover before use N O N) Data Capture/Laser Output Window * O) Handylink™Connector (host/slave) *Remove protective film cover before use vi ...

The new Datalogic Falcon X3 mobile computer delivers the ultimate in ruggedness, ergonomics, computing and data capture technologies. Falcon X3 options provide a tailored solution for demanding environments needing real time transaction visibility. The Falcon X3 delivers rugged construction, laser and image data capture, along with real time communications in a product that is effortless to develop ...

abuse and trauma. The new Falcon X3 survives drops from 6 feet (1.8 meter) to concrete. Coupled with an IP64 sealing against water and dust allows the Falcon X3 to literally take an industrial pounding. Plastic key caps with metal snap dome actuation withstand not only the abusive environment but the heavy use found in third party logistics centers, literally ...

equipped with. All options are listed below: • communication: IEEE 802.11 a/b/g, Bluetooth • capture: high performance laser with green spot, 2D imager with green spot, auto ranging laser, camera • form factor: hand held, pistol grip • keyboard: numeric, alphanumeric For further details about the Falcon X3™ models refer to the w ...

256MB Flash, 29-key Numeric, High Performance Laser w Green Spot, Windows Mobile 6.5 • 945250012 FalconX3 00A0XL-3N0-MEN1 Falcon X3 Pistol grip, 802.11 a/b/g CCX v4, Bluetooth v2, 256MB RAM, 256MB Flash, 29-key Numeric, Auto ranging laser (XLR), Windows Mobile 6.5 • 945250013 Falcon X3 00A0WI-3N0-MEN1 Falcon X3 Pistol grip, 802.1 ...

− 1 Falcon X3™ mobile computer − 1 CD-ROM Datalogic SDK containing: ƒ Datalogic Applications (DCU, DFU, TCL, SDK) ƒ User Manuals − 1 CD-ROM Getting Started Disk only for Windows Mobile − 1 rechargeable battery pack − 1 Windows Mobile End User License Agreement (depending on model) − 1 Keypad overlay Other packages will contain the accessories necessary for the Falcon X3� ...

Falcon X3 provides the possibility to add a Micro SD memory storage card. To access the Micro SD card slot and insert the card, proceed as follows: 1. Turn off the Falcon X3. 2. Press the latch release and lift the battery from the enclosure, as indicated in the figure below: 3. Open the Micro SD card slot by pulling up the locking plate: 4. Insert the Micro SD card with the written part upward. Lock the card ...

To remove the Micro SD card, follow the steps above to access the SD area, and remove it from its slot. CAUTION Follow proper ESD precautions to avoid damaging the SD. Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring that the operator is properly grounded. Do not force the card. If you feel resistance, remove the card, check the orientation, and reinsert it. Do not us ...

94A151131 Dock, Powered Mobile, FalconX3 94A151133 Dock, Ethernet 4 Slot, FalconX3 94A151135 Charger, 4 Slot Dock, FalconX3 94A151137 Charger, 4 Slot Battery, FalconX3 ‰ Batteries 94ACC1386 Battery, High Capacity, FalconX3 ‰ Power Supply 94ACC1381 Power Supply, Dock, PWR Plug 2.1mm 94ACC1385 Power Supply, Charger, MBC and Dock ‰ Cables 94A051970 Cable, USB Handylink, Clie ...

2 2 BATTERIES AND MAINTENANCE NOTE Rechargeable backup batteries and battery packs are not initially charged. Therefore the initial operation to perform is to charge them. See below. CAUTION Annual replacement of rechargeable battery pack avoids possible risks or abnormalities and ensures maximum performance. 2.1 CHARGING THE BATTERY PACK NOTE The battery pack autonomy varies according to many factors, such as the frequency of bar ...

achieve the longest battery life, store the terminal and the spare batteries between 20 to 30 ºC (68 to 86 ºF). The Batteries must be charged at a temperature ranging from 0° to +40 °C (+32° to +104 °F). For the GSM models the maximum recommended temperature is + 35° C. At higher values the charging may slow down. NOTE The battery level may not be displayed correctly for ...

2 2.2 REPLACING THE BATTERY PACK To correctly replace the battery pack, proceed as follows. 1. Turn off the Falcon X3™. 2. Press the latch release and lift battery from the enclosure as indicated in the figure below: 3. Install the new battery pack, first insert the top end, then the latch bottom as indicated in the following figure. 11 ...

authorized personnel and following this manual. The battery pack may get hot, explode, ignite, and/or cause serious injury if exposed to abusive conditions. If the battery pack is replaced with an improper type, there is risk of explosion. Do not place the battery pack in or near a fire or heat; do not place the battery pack in direct sunlight, or use or store the battery ...

2 WARNING In case of leakage of liquid from the battery, avoid contact with liquid the skin or eyes. If the contact occurs, immediately wash the affected area with water and consult a doctor. Do not solder directly onto the battery pack. Do not expose the battery pack to liquids. Avoid any knocks or excessive vibrations. If the device or the battery is dropped, especially on a hard surface, you should take it to the nearest Author ...

Periodically clean the Falcon X3 with a slightly dampened cloth. 14 ...