Alcatel OmniAccess 5740 Getting Started Manual
Text of the manual
Notes on numbered items on banner & legal pages
1
u26801 West Agoura Road
Calabasas, CA 91301
(818) 880-3500
FAX (818) 880-3505
[email protected]
US Customer Support—(800) 995-2696
International Customer Support—(818) 878-4507
Internet—service.esd.alcatel-lucent.com
Website: www.alcatel-lucent.com
Part No: 060315-00, Rev. A
For final pro
CAUTION: THIS EQUIPMENT IS TO BE INSTALLED AND SERVICED ONLY BY QUALIFIED SERVICE
PERSONNEL.
Batteries Caution. There is a danger of explosion if the battery in your chassis is incorrectly replaced.
Replace the battery only with the same or equivalent type of battery recommended by the
manufacturer. Dispose of used batteries according to the manufacturer’s
Table of Contents
Package Contents.....................................................................................................................1
Required Tools and Equipment..........................................................................................2
Connecting AC Input Power..............................................................
List of Figures
Connecting the Power Cord on OmniAccess 5740 USG 3
Connecting to the OmniAccess 5740 USG System Console 5
OmniAccess 5740 Unified Services Gateway Overview
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
1
Alcatel-Lucent
Beta
Beta
OmniAccess 5740 Unified Services Gateway Getting Started Guide
OmniAccess 5740 Unified Services Gateway Overview
The OmniAccess 5740 Unified Services Gateway (OmniAccess 5740 USG) is
designed
Left running head:
Chapter name (automatic)
2
Beta
Beta
OmniAccess 5740 Unified Services Gateway Getting Started Guide
Alcatel-Lucent
REQUIRED TOOLS AND EQUIPMENT
You need the following items to install the OmniAccess 5740 USG:
•
Electrostatic Discharge Wrist Strap (ESD)
•
Level (optional)
•
Tape Measure (optional)
Note:
This equipment
Connecting AC Input Power
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
3
Alcatel-Lucent
Beta
Beta
OmniAccess 5740 Unified Services Gateway Getting Started Guide
CONNECTING AC INPUT POWER
This section provides the procedure for connecting AC-input power to the
OmniAccess 5740 USG.
Note:
1.
The OmniAccess 5740 USG
Connecting AC Input Power
Left running head:
Chapter name (automatic)
4
Beta
Beta
OmniAccess 5740 Unified Services Gateway Getting Started Guide
Alcatel-Lucent
Step 5: Ensure that the cable is not left in a hazardous position that could impair
movement of personnel or be frayed due to the movement of other equipment in
the vicinity.
Warning: Read the insta
Connecting to the OmniAccess 5740 USG Console Port
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
5
Alcatel-Lucent
Beta
Beta
OmniAccess 5740 Unified Services Gateway Getting Started Guide
CONNECTING TO THE OMNIACCESS 5740 USG CONSOLE PORT
The OmniAccess 5740 USG has a RJ-45 console port connector. A RJ-45 - RJ-45
�