Extron electronics SW HDMI Series Operation & User’s Manual

WARNING: This symbol, , when used on the product, is intended to alert the user of the presence of uninsulated dangerous voltage within the product’s enclosure that may present a risk of electric shock. ATTENTION: This symbol, , when used on the product, is intended to alert the user of important operating and maintenance ( ...

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. The Class A limits provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency en ...

Notifications The following notifications are used in this guide: CAUTION: A caution indicates a situation that may result in minor injury. ATTENTION: Attention indicates a situation that may damage or destroy the product or associated equipment. NOTE: A note draws attention to important information. Software Commands Commands ...

About this Guide ................................................. 1 About the SW HDMI Series Switchers ................ 1 Features ............................................................. 1 Application Diagrams .......................................... 3 Installation ......... ...

1 Introduction This section gives an overview of the SW HDMI Series switchers. Topics include: •� About this Guide •� About the SW HDMI Series Switchers •� Features •� Application Diagrams About this Guide This guide describes the Extron SW HDMI Series switchers and discusses how to install, configure, and oper ...

2 •� Rack and furniture mounting — The SW HDMI Series can be mounted on a rack shelf or under a desk or podium with an optional mounting kit. •� Remote configuration and control — The switcher can be configured via an RS-232 or USB connection via SIS commands (see Remote Communication and Control beginning on page ...

3 Application Diagrams The following diagrams show examples of how SW HDMI Series switchers can be connected. 0.3A MAX POWER 12V 1 3 4 INPUTS OUTPUT Tx Rx RS-232 AUTO REMOTE 1 2 3 4 G CONTACT 1 2 3 4 +v TALLY OUT 1 3 1 4 2 3 1 4 2 3 1 4 2 2 3 100 LINK ACT COM IR INPUT RELAY TX RX R IPL 250 ® ON OFF DISPLAY MUTE SCREEN UP SC ...

4 Installation This section describes the installation and setup of the SW HDMI Series switchers. Topics include: •� Installation Overview •� Rear Panel Features •� Wiring the Power Connector — SW2 and SW4 HDMI Only (Optional) •� Wiring for RS-232 Control •� Connecting to the USB Port •� Enabling Auto ...