Fujitsu FP-1000 Operation & User’s Manual

Standard Model FP-1000 Built-in Power Supply Model FP-1000PW Fujitsu Isotec Limited. KA02066-Y900-04 ...

trademarks or registered trademarks of their respective companies.  This document is subject to change without notice.  Unauthorized reproduction or copying of this document, whether in part or in whole is prohibited.  Please be aware that we cannot be held liable in any way for the effects of operating this product in accordance with this document or damages caused due ...

How to Use This Product Safely  Using This Document This document contains important information for using the product safely. Carefully read and understand this manual before using the product. After reading this manual, store it with care at a place where it can be found at any time, such as near the product.  Using Recycled Parts In consideration of the environment, some recycled parts have been used in this product. Warning This is a class ...

在中国使用时的注意 警告 此为 A 级产品。在生活环境中，该产品可能会造成无线电干扰。在这种情况下，可能需要用户 对干扰采取切实可行的措施。 电子信息产品安全使用期限 这标记是按照 2006 年 2 月 28 日公布的[电子信息产品污染控制管理办法] 以及 SJ/T11364-2006[电子信息产品污染控制标识要求]在中国销售的电 子信息产品的环保使用期限 ...

Safety Precautions  Warning Marks This document uses the following warning marks in order to ensure safe and correct use of the product and to prevent any harm or damage to you or to others. Warning Caution Used for instructions intended to alert the user to the risk of death or severe injury should the product be used improperly without paying attention to this mark. Used for instructions intended to alert the user to the risk of injury or mate ...

with this printer. Using any other AC adapter carries the risk of fire and electric shock. When connecting the drawer kick cable, do not use any method not specified in the instruction manual. This may result in fire or electric shock. Do not place metals or vessels containing water, such as a vase, flower pot or cup on the top of, or near the product, or pour water on it. This may result ...

smoke or bad ventilation, or in places with fire hazards. This may result in electric shock or fire. When connecting the AC adapter, do not use voltages outside the range indicated on the adapter. In addition, avoid using multiple cords connected to one outlet. This may result in electric shock or fire. Do not insert or remove the power plug using wet hands. This may result in electric shock or ...

In case of emergency involving heat, smoke or acrid fumes occurring, immediately turn off the power switch, and remove the power plug from the outlet. Request the sales company (or maintenance service center) for repair after confirming the smoke has gone. Users must under no circumstances whatsoever try to repair the product due to the dangers involved. Using the product in the abnormal state without taking any corrective action may result in fire ...

This may destroy the balance and cause the product to fall over or down, resulting in injuries. Do not locate the product on a place with severe vibration, or on an unstable or inclined surface. The product may fall over or down, resulting in injuries. Do not leave the product in high-temperature locations, such as directly under the sun or near a heater, for long periods of time. High temperature may caus ...

from the outlet. In addition, also remove the connection cable, etc. Pay adequate attention to your feet while performing the operation. Scratching the power cable may result in electric shock or fire, and injuries may also be caused if the product falls over or down. When removing the power plug, instead of pulling the electric cord, be sure to remove it by gripping the power plug. If the power c ...

1. Appearance and Name of Components ················································· 1 1-1. Names of Components ································································ 1 1-2. Package Contents·······························································� ...

9. Special Mode (Test Print, Setup Menu...) ············································ 38 9-1. Test Print·······································································� ...

1. Appearance and Name of Components 1-1. Names of Components Standard Model Built-in Power Supply Model • Top Cover Release Lever Power Switch Top Cover Control Panel Front Cover AC Inlet Middle Cover Opens to replace paper. • Release Lever Used for opening the top cover. • Power Switch Turns the printer power ON/OFF. • Control Panel Contains switches for operating the printer and lamps that indicate the printer status. • Front Cov ...

1-2. Package Contents CD Quick Start Guide Thermal Paper Rubber Feet (For vertical installation) 58mm Width Separator Serial Interface Cable *The Serial Interface Cable is not supplied in some cases, depending on the printer model, region,etc. *The AC Adapter is not supplied in some cases, depending on the printer model, region,etc. AC Adapter ...

2. AC Adapter Only use the AC adapter specified below. Item No. Remarks AC Adapter KA02951-0120 Input : 100 to 240V, 50-60Hz, 1.1A Output : 24V ,1.5A Warning: Only use authorized AC adapters. Warning: Do not use any other bundled AC adapter other than designed for this printer. ...

3. Paper Specifications Only use the thermal paper roll specified below. 3-1. Paper Width • 80mm paper 0 0.1 80  mm • 58mm paper 0 0.1 58  mm 3-2. Paper Thickness • 65 - 85μm 3-3. Paper Roll • Outside diameter: φ83mm or less • Core diameter: φ12±0.5mm (inside) / φ18±0.5mm (outside) • Printing surface: outer surface of the roll • Treatment of end of paper: The roll paper must not be glued to the core. The end of ...

3-4. Recommended Thermal Paper Manufacturer Product Name Quality Characteristic Paper Thickness Density PD160R Monochrome thermal paper (high-grade preservation type ) 75μm 100% Oji Paper Co., Ltd. PD190R Monochrome thermal paper (mid-grade preservation type ) 75μm 100% TF60KS-E Monochrome thermal paper (normal type) 75μm 100% TP60KS-F1 Monochrome thermal paper (mid-grade preservation type) 75μm 100% TF50KS-E Monochrome thermal paper (norm ...

4. Preparation No printer cable is provided with the product. Obtain a printer cable suitable for the product interface. If you have any question, consult your dealer. Before connecting or disconnecting cables, make sure of the following: (1) The power to the printer and all other devices connected to the printer is turned off. (2) The AC adapter power cable has been unplugged from the outlet. Caution: When connecting cables or moving the pr ...

4-1. Connecting the Interface Cable (to the printer) 4-1-1 Printers with serial and USB interfaces Standard Model USB Interface Cable Type-B * Connect the printer to a PC through this connector. Serial Interface Cable * Use the screws to secure it in place after connection. Built-in Power Supply Model Serial Interface Cable * Use the screws to secure it in place after connection. USB Interface Type-B Connector Serial Interface Connector Power ...

4-1-2 Printers with LAN interfaces Standard Model LAN Interface Cable Built-in Power Supply Model LAN Interface Cable LAN Interface Connector Power Connector DIP Switch LED Drawer Kick Connector Caution: Do not touch the DIP switches during normal use. This may change the network settings, disabling normal printing. Caution: If the device is installed vertically, the LAN cable may be un-usable due to its shape. Please check before installing ...