Gigaset C510 Manual 

(¢ page 6) 2 Answering machine icon (C510A only) 3 Signal strength (¢ page 6) 4 Internal number of the handset 5 Using the display keys 6 Control key (p) t: Open the menu for setting the volume (¢ page 16) s: Open the directory (¢ page 7) u: Display the list of registered handsets v: In idle state: open main menu (¢ page 15) In call state: Microphone off (� ...

(¢ page 1) is activated! Not all of the functions described in this user guide are avail- able in all countries. Caring for your telephone Wipe the base, charger and handset with a damp cloth (do not use solvent) or an antistatic cloth. Never use a dry cloth as this can cause static. Contact with liquid If the handset should come into contact with liquid: u Switch the handset off ...

Delivery unit base station and handset: One Gigaset handset, one Gigaset base station C510/ C510A, one mains adapter, one phone cord, two batteries, one battery cover, one user guide. Delivery unit handset and charging cradle: One Gigaset handset, one charging cradle with mains adapter, two batteries, one battery cover, one user guide. If you have purchased a model with multiple handsets, the package should conta ...

Setting up the handset for use The display is protected by a plastic film.  Please remove the protective film!  Inserting the batteries and closing the battery cover ¤ Connect the flat plug from the mains adapter 1. ¤ Plug the power adapter into the plug socket 2. To disconnect the plug from the charger, press the release button 3 and disconnect the plug 4. 1 2 3 4 Warning Only use rechargeable batteries (� ...

The correct charge status can only be displayed if the batteries are first fully charged and dis- charged. ¤ Charge the handset in the base for 6 hours. ¤ After charging, remove the handset from the base and only replace it when the batteries are fully discharged. Registration u Delivery unit base station and handset: The handset is pre-registered with the base sta- tion. If you have purchased a model w ...

You can register your handset on up to four bases. You must manually register the handset on both the handset (1) and the base (2). Registration takes approx. 1 minute. Handsets are assigned the lowest available internal number (1-4). If the internal numbers 1–4 are already assigned to other devices, the number 4 is overwritten. Changing the display language If you do not understan ...

calls External calls are calls using the public telephone net- work. ~ (Enter phone number) ¤ c. The number is dialled. (Or you can first press and hold c [dialling tone] and then enter the number.) During the call you can adjust the earpiece volume using t and set the volume with q. End the call/cancel dialling: Press the end call key a. You can automatically insert a network provider dial- ling code be ...

s ¤ Dir. empty New entry? ¤ OK ¤ ~ (Enter number) ¤ OK ¤ ~ (Enter name) ¤ OK Saving a number in the directory s ¤ Menu ¤ New Entry ¤ OK ¤ ~ (Enter number) ¤ OK ¤ ~ (Enter name) ¤ OK Selecting a directory entry Open the directory with s. You have the following options: u Use s to scroll through the entries until the required name is selected. u Enter the first character of the name, if ...

You can select whether the message key f flashes (default setting) or does not flash when new mes- sages arrive. Please do the following: ¤ Press the key sequence: Menu ¤ P#Q5#M The following is displayed: ¤ Press one of the following keys to select the mes- sage type: Your selection is displayed (e.g. 5 for missed calls); the current setting flashes: ¤ Press key Q or 1, to set the behavior for new messages: Yo ...

machine (C510A) The answering machine is operated using the keys on the base (¢ page 1) or from the handset. The tele- phone is supplied with a pre-recorded announce- ment. You can only record your own announcement messages using the handset. This pre-recorded announcement is used if no personal announcement is available. If the memory is full, the answering machine switches itself off automatically. It switches itself on again ...

Activating the answering machine ~ (Enter your own number and allow the phone to ring until you hear the message: "Please enter PIN") ¤ ~ enter system PIN Your answering machine is activated. It tells you how much capacity is left. The messages are played. The answering machine cannot be deactivated remotely. Locating a handset (paging) You can locate your handset using the base. u Briefly press the registrati ...

repeating after a pause (snooze mode) Prerequisite: a wake-up call is sounding. u Press the display key Off. The wake-up call is deactivated for 24 hours or u Press the display key Snooze or any key. The wake- up call is deactivated and then repeated after 5 minutes. After the second repetition the wake- up call is deactivated for 24 hours. Phone settings Setting earpiece and speaker volume, activating/ deactivating ...

You can reset individual settings and changes that you have made. Entries in the directory, the call list and the handset's registration to the base will be retained. Menu ¤ Settings ¤ OK ¤ System ¤ OK ¤ Reset Handset ¤ OK ¤ Reset to factory settings? ¤ OK Changing the ringtones for the Gigaset C510A base u Volume: You can choose between five volumes and the "crescendo" ring. Select "0" to deactivate the base rin ...

Voltage: 1.2 V Capacity: 400–800 mAh The device is supplied with two approved batteries. Base power consumption General specifications Questions and answers If you have any queries about the use of your tele- phone, visit our website at  www.gigaset.com/service  for assistance 24/7. The table below contains a list of common problems and ...

are offered in the form of menus. To select a function while the phone is in idle status, press Menu or control key v (open menu), use the t and s control key to scroll to the function you require and press OK to confirm. To return to idle status: press and hold the a key. é Alarm Clock Activation Activating/deactivating the alarm clock. Wake up time Input format: HHMM. êVoice Mail Play Me ...

Audio Settings Call Volume Earpiece Volume Can be set to one of 5 levels. Handsfree Vol- ume Can be set to one of 5 levels. Ringer Volume 5 levels + "crescendo" available ¢ page 12. Advisory Tones Activate/deactivate. Battery Low Activate/deactivate warning tone for low battery. Ringtones (Handset) External Calls 20 ringer melodies available ¢ page 12. Internal Calls Alarm Cl ...