GRASS VALLEY T2 Application Note

2 www.grassvalley.com T his application note explains how to set up multiple T2 units for synchronized 4K playback. Introduction The Grass Valley, a Belden Brand, T2 iDDR has two independent, Full HD output channels that can be used for multiscreen events, digital signage and projection map ...

3 www.grassvalley.com T2 Settings •� The following process uses Front Panel mode •� These settings should be applied to ALL syn- chronized T2 units 1. Set Reference ( common to GPI and RS-422 synchronization) Tap [Config] > [General] > [Hardware] tabs and select [External] from the ...

4 www.grassvalley.com 4. Set GPI Input (GPI only) Tap [Config] > [GPI] > [Input] tabs. •� PLAY both P1 and P2 with GPI Input 1 Set [GPI-Input 1], check [P1] and [P2] in the Channel section. Select [Play] from the Action drop-down list. After setting, tap [Apply]. •� STOP both P1 and ...

5 www.grassvalley.com T2 Projector Projector c ator 2 1 3 4 1 2 3 4 P1 SDI out Ref RS422(BVW) RS422(BVW) Ref P2 SDI out P1 SDI out P2 SDI out SYNCHRONIZE G4 Connect the Sync Generator or Controller The sync generator should be set to generate an HD reference signal (Tri-level). Please refer ...

YouTube and Grass Valley - A Belden Brand on LinkedIn. GVB-1-0183B-EN-AN 6 APPLICATION NOTE PREPARING TWO T2 IDDRS FOR SYNCHRONIZED 4K PLAYBACK Belden, Belden Sending All The Right Signals and the Belden logo are trademarks or registered trademarks of Belden Inc. or its affili ...