KROHNE ifc 300 Handbook

Contents • CE / EMC / Standards / Approvals 3 • Safety information 4 • System description 4 • Product liability and warranty 4 • Items included with supply 5 • Signal converter versions and device nameplates 5 1 Electrical connection: power supply 6 - 15 1.1 Location and important notes on installation PLEASE NOTE ! 6 - 7 ...

IFC 300 3 4 Operator control of the signal converter 30 - 51 4.1 Display, operating and control elements 30 4.2 Function of the keys 31 4.3 KROHNE program structure for EMFs 32 4.4 Tables of settable functions 33 - 43 4.5 To reset counters 44 4.6 To delete error messages 44 4.7 General directions for special measurements, tasks and diagnostics 45 4 ...

Safety information Please read these operating instructions and observe applicable national standards, safety requirements and accident prevention regulations. Installation and operation of the measuring device may only be carried out by qualified personnel. Warning sign: electric shock hazard WARNING! Electric shock is dangerous and can ...

IFC 300 5 Items included with supply • Signal converter in the version as ordered. • Signal cable (only for remote versions F and W) in the version and length as ordered (Standard: signal cable A, length 5 m) • Report on factory settings • Calibration report • Quick Start directions, in the language ordered, for installation, electrical c ...

1 Electrical connection: Power supply 1.1 Location and important notes on installation PLEASE NOTE ! • Electrical connection in conformity with VDE 0100 “Regulations for electrical power installations with line voltages up to 1000 V“ or equivalent national regulations. • Use separate entry fittings (PG screwed cable entries) fo ...

IFC 300 7 • Construction of the various housing versions IFC 300 C (compact) and IFC 300 F (remote) The terminal compartments are accessible after unscrewing cover 2 (and 5, for F Version only). 1 Cover, electronics compartment 2 Cover, terminal compartment for power supply and inputs/outputs 3 Cable entry for power 4 Cable entry ...

1.2 Connection to power for IFC 300 versions C, F and W PLEASE NOTE ! • Degree of protection IP 65 and 67 to IEC 529 / EN 60529, equivalent to NEMA 4 / 4X and 6, dependent on the version. • Rated values: The housings of the flowmeters, which are designed to protect the electronic equipment from dust and moisture, should be kept wel ...

IFC 300 9 1.3 Electrical connection of remote sensors (primary heads) 1.3.1 General information on signal cables A and B and field current cable C Proper functioning is ensured by the KROHNE signal cables A and B with double or triple foil shielding. However, when other signal cables are used, please note the following electrical data! Electrical s ...

1.3.2 Stripping (preparation) of signal cables A and B Customer-supplied materials W Insulation tubing (PVC), dia. 2.0-2.5 mm / approx. 0.1” X Heat-shrinkable tubing or cable sleeve Y Wire end ferrule to DIN 41 228: E 1.5-8 Please note: • The figures in tables and drawings identify the shields, stranded drain wires and wires of si ...