Longshine GS9120 Manual 

a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio fr ...

please verify that your package contains the following items. 1. One 16/24-Port Gigabit Ethernet Switch with 4-Port Mini-GBIC 2. One AC power cord 3. Rack-mount brackets (optional) 4. User’s Manual Introduction General Description Easily boost your networking throughput; th ...

and IEEE 802.3z standards. � 16/24 * 10/100/1000 Mbps RJ-45 Nway ports � 4* Mini-GBIC port for optional fiber optical communication � Supports NWay protocol for speed (10/100/1000Mbps) and duplex mode (Half/Full) auto-detection � Supports MDI/MDI-X auto crossover � Supports full ...

Power Off The switch is powered off Port LEDs LED Status Operation Steady Green Valid port connection at 1000 Mbps Blinking Green Valid port connection and there is data transmitting/ receiving 1000M Off Port disconnected or the port is connected at 10 Mbps or 100 Mbps St ...

Power Receptacle To be compatible with the electric service standards around the world, the switch is designed to afford the power supply in the range from 100 to 240VAC, 50/60Hz. Please make sure that your outlet standard to be within this range. To power on the switch, plug the female end of the power cord firmly into the receptacle of the ...

switch to keep the switch from slipping. The recommend position has been square-marked. 2. Install the switch on a level surface that can support the weight of the unit and the relevant components. 3. Plug the switch with the female end of the provided power cord and plug the male ...

1. Crossover or straight-through cable: All the ports on the switch support Auto-MDI/MDI-X functionality. Both straight-through or crossover cables can be used to connect the switch with PCs as well as other devices like switches, hubs or router. 2. Category 3,4,5 or 5e UTP/STP cable: To make a valid connection and obtain the op ...

interfaces are connected, the system adapts the fiber interface and disables the relevant cooper port automatically. Backbone Network Application This switch is ideal for boosting the throughput of backbone. For an application sample of network topology, please refer to the following chart. ...

IEEE802.3z/ab 1000BASE-T Interface 16/24 *10/100/1000 Mbps auto MDI/MDI-X RJ-45 switching ports 4* Mini-GBIC module sockets Cable Connections RJ-45 (10BASE-T): Category 3,4,5 UTP/STP RJ-45 (100BASE-TX): Category 5 UTP/STP RJ-45 (1000BASE-T): Categor ...