Zenith TTL Handbook

Text of the manual

For reference use on many Chinon manual focus and metering cameras

This camera manual library is for reference and historical purposes, all rights reserved. This page is copyright by , M. Butkus, N.J. This page may not be sold or distributed without the expressed permission of the producer I have no connection with Chinon

You can be justly proud that you have chosen the Zenith TTL*_ the latest and most advanced 35mm reflex

camera from the U.S.S.R. * Through-the-lens metering offers many advantages over other metering systems. Close range pictures with the aid of bellows or extension tubes; using filters or teleconverters; taking pictures with the aid of a microsc

Though many hints and tips towards better photography have been included, this handbook should in no way be

thought of as a comprehensive guide to general photographic techniques. There are numerous useful books of this type available and if you are just taking your first shaky steps in photography it would certainly benefit you to consult your local library

Flash Synchronization Electronic flash only at 1/30th sec. through a standard 3mm co-axial -- socket.

Viewing/Focusing system Eye-level pentaprism/instant return mirror shows upright laterally correct image. Bright Fresnel focusing screen with central ground glass/microprism spot. Exposure meter Built- in CdS cell with needle coincidence through viewfinder,

strokes till no further movement is possible while

applying light finger pressure to the back Sprocket wheel (24). The Sprocket should rotate in time with the lever action and not 'free-wheel. 3.Push up the Cassette Retaining Spindle (21) from inside the camera. Place the cassette into its chamber (22) ensuring that the cassettes projecting end faces down. P

9. Now turn Frame Counter Dial (5) until the

number '0 shows against the Frame Counter Index (29) and press the Shutter Release (3) once more. • If you are not going to take photographs immediately do not wind on the film at this stage since it is always best to leave the shutter in the fired position, just in case the camera is put away without being used

Though sometimes thought to be photography's biggest problem, obtaining correct exposure is not really so

difficult thanks to the latitude of modern-day films. There are three governing factors: sensitivity to light of the film (usually expressed as an ASA speed rating); shutter speed, which controls the amount of time the image is allowed to affec

(e.g. foray 64ASA film set it to 65 on the ASA

scale, for a 25 ASA film set it to the click-stop setting between 1 6 and 32 ASA. 3.Match the Needle. While continuing to depress the Shutter Release slightly turn the Aperture Ring (14) or the Shutter Speed Dial (1) until the needle bisects the circle situated between the + and -- signs on the right-hand side o

If using color slide film, avoid subjects with great brightness differences. Even a close-up reading of the

shadow areas often results in excessive exposure for the sunlit areas, which then appear too light and burnt out when the slide is projected. A straightforward average brightness reading under conditions of uniform frontal or side angled lighting y

Rewind Release Ring (4) is still turned fully clockwise and the three dots are properly aligned. This will ensure

correct operation of shutter and exposure counter in subsequent pictures. Your cameras Tripod Bush accepts a standard 1/4 in Whitworth screw. When fitting a tripod or other bush- mounted accessory (e.g. flash bar) care should be taken to see that

More Zenith Digital Camera Owners Instructions: