Miccus MHTXP-04 Operation & User’s Manual

Please read the operation instructions carefully before use. Quick Start Guide: 1. Attach the antenna: on the back of the Miccus® Home TX Pro, remove the red rubber connector cover and attach the supplied antenna to the antenna terminal (turn clockwise until slightly snug). Optimize antenna ...

more than one device, follow step 4 to pair both receiving devices individually then power down the Miccus® Home TX Pro and your second device. Next, power on both receiving devices (headphones, speakers, etc.) then place the Miccus® Home TX Pro into pairing mode again. When devices ...

The Miccus® Home TX Pro is a long range wireless stereo transmitter featuring Bluetooth® 4.2 and the aptX Low Latency codec. Use it to add wireless streaming technology to your existing television or stereo equipment, or use it in place of your current transmitting device to extend your wireless range. The Miccus® Home TX Pr ...

compatible A2DP Bluetooth® profile wireless Receiving device. Compatible devices include Bluetooth® enabled headphones/ speakers or Bluetooth® adapters like the Miccus® Home RTX, Home RTX Mini, Mini-jack AX4, Mini-jack RTX, or the SR-71 Stealth Headphones. Bluetooth C ...

Power on/off The Miccus® Home TX Pro supports mini USB power. Connect one end of the included USB power cable to the Home TX Pro USB jack; connect the other end to a compatible USB power supply unit (5V/500mA), computer, or television USB port. Any USB charger that is rated at an output of 5V@500mA or higher is compatible and m ...

be no more than one meter apart when pairing (the closer the better until paired). 1. Power on your headphones, speaker or other compatible A2DP Bluetooth® profile device and engage pairing mode. 2. Place the Miccus® Home TX Pro into pairing mode: press and hold the power button (8.5 ...

off, press and hold the multi-function/power button for 18 seconds, then release the multi-function/power button and power off the Miccus® Home TX Pro. The Device has been reset. Note: After a factory reset, the internal Bluetooth® pairing memory will be deleted. You may need to r ...

in the audio 1. Make sure to use the supplied USB adapter as PC USB ports can introduce noise. 2. Move the Miccus® Home TX Pro away from any amplifiers or powered speakers. 3. Make sure the Miccus® Home TX Pro is cabled to the correct line level output on your stereo receiver. Can’t pair my device with the Home TX Pro 1. Make sure the Mic ...

Please read the following recommendations before using your Miccus® Home TX Pro: •� To keep from damaging the Miccus® Home TX Pro internal circuit, avoid exposure to liquid, moisture and humidity. •� Extreme temperatures can shorten the life of electronic devices. •� Don’t use abrasive cleaning solvents to clean the Miccu ...